SCT-3001 Melt Flow Rate Meter

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SCT-3001 melt flow rate meter is an improved version that has added numerous functions. It has greatly improved in terms of instrument configuration, instrument service life, operational convenience, and testing accuracy, and has the advantages and cost-effectiveness of general melt flow rate meters in China. Meets standards: ISO 1133, ASTM D1238, GB/T3682.

Product Details

1、 Product Usage:

SCT-3001 Melt Flow Rate MeterIt is used to determine the MFR value of the melt flow rate of various plastics and resins in a viscous flow state. It is suitable for engineering plastics such as polycarbonate, polyarylsulfone, fluoroplastics, nylon, etc. with high melting temperatures, as well as for testing plastics with low melting temperatures such as polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin, etc. It is widely used in plastic production, plastic products, petrochemical industry, as well as related universities, research units, and inspection departments.

The melt flow rate meter is applicable to the determination of the specified mass flow rate of thermoplastic melt in the national standard GB/T3682-2000 "Determination of mass flow rate and volume flow rate of thermoplastic melt". This standard also adopts the provisions of ISO 1133:1997 and can meet the ASTM D1238 testing standard.

SCT-3001 Melt Flow Rate MeterFor the desktop structure, reasonable design, stable and reliable performance, beautiful appearance, and convenient operation, high-performance and high-precision control instruments with high sampling accuracy and fast control rate are adopted. Fuzzy PID algorithm is used for constant temperature control.
2、 Product features:

1. Fast heating rate with minimal overshoot

2. High temperature control accuracy

3. The melt flow rate tester can quickly return to a constant temperature state after filling

4. Convenient calibration and correction of experimental parameters

5. Manual and automatic cutting test methods can be used

6. Chinese LCD display

7. Equipped with a printer to automatically print out test results
3、 Product parameters:

1. Squeezing and discharging part

① Mouth mold: Material: Tungsten steel Discharge port diameter: Φ 2.095 ± 0.005 mm, Discharge port length: 8.000 ± 0.025 mm

② Inner membrane cavity: Material: Tungsten steel. Loading cylinder diameter: Φ 9.550 ± 0.025 mm. Loading cylinder length: 152 ± 0.100 mm

③ Piston rod: Material: 304 stainless steel Piston rod head diameter: 9.475 ± 0.015 mm, piston rod head length: 6.350 ± 0.100 mm

2. Standard test load (8 levels of complete set of weights)

3. Temperature range: Conventional room temperature -450 ℃ (500 ℃ optional)

4. Constant temperature accuracy: ± 0.2 ℃ 5. Display resolution: 0.1 ℃

6. Cutting method: optional manual or automatic cutting

7. Temperature recovery time: less than 4 minutes

8. Printing: Micro printers automatically print output

9. Power supply voltage: AC220V ± 10% 50HZ