Plastic pipe ring stiffness testing machine

1Plastic pipe ring stiffness testing machineModel: DLD series

Ring compression strength testing machine (0-5000N, 10KN, 50KN, 100KN, 200KN, 300KN)

Range of measurement, speed range, testing space (excluding gripper), machine weight and size

5000N 0.001-1000mm/min walking space: 950mm, approximately 180kg

Test width: 360mm Machine size: approximately 560 × 660 × 1600 mm (length × width × height)

10KN-50KN 0.001-500mm/min Walking space: 950mm, approximately 600kg

Test width: 400mm Machine size: approximately 720 × 500 × 1900 mm (length × width × height)

100KN 0.001-360mm/min Walking space: 950mm 1200kg

Test width: 350mm Machine size: approximately 1060 × 960 × 2200 mm (length × width × height)

200KN 0.001-360mm/min Walking space: 950mm 1200kg

Test width: 350mm Machine size: approximately 1060 × 960 × 2200 mm (length × width × height)

300KN 0.001-160mm/min Walking space: 900mm, approximately 1400kg

Test width: 480mm Machine size: approximately 1090 × 840 × 2100 mm (length × width × height)

2、 Product Description:

The material ring stiffness testing machine is suitable for testing the mechanical properties of metal and non-metal materials such as tension, compression, bending, shear, tearing, peeling, and puncture. It can also perform automatic control tests of constant velocity loading, constant velocity deformation, and constant velocity displacement, and has the functions of low cycle load cycle, deformation cycle, and displacement cycle. Calculate indicators such as elongation, tensile strength, flexural modulus, elastic modulus, yield strength, net energy, flexural energy, and total energy.

Plastic pipe ring stiffness testing machineUsing PC for data processing and analysis, the experimental results can be automatically saved. After the experiment is completed, the experimental curve can be retrieved again to reproduce the experimental process, or to compare and enlarge the curve. The experimental software on Windows and Visit platforms has strong data and graphics processing capabilities, and can print complete experimental reports and curves in real time.

3、 Meets the standard: GB/T16491-1996 Electronic Universal Testing Machine

The operating software of this machine covers a total of 200 standards such as GB, ISO, ASTM, etc., including ISO34, ISO 37, ISO 178, and ISO 527 proposed by customers.

This machine can handle curve categories:

Load V.S. displacement load V.S. time

Displacement V.S. Time Stress V.S. Strain Load V.S. Two point Extension

4、 Technical parameters:

1. PCI bus digital measurement and control circuit, integrated and reliable;

2. Built in large-scale CPLD programmable devices with high-speed computing capabilities, capable of real-time processing of digital signals;

3. All optical electrical isolation electronic control;

4. Display the test force and peak value in four levels, with an accuracy of ± 1% of the displayed value starting from 20% of the range in each level;

5. Display deformation in four levels, with an accuracy of ± 0.5% starting from 20% of the range in each level;

6. Displacement measurement sensitivity of 0.01mm;

7. Test force overload protection, record historical logs for future reference;

8. Closed loop control of constant displacement, constant stress, and strain;

9. Provide ATP programmable automatic test program;

10. Real time display of test curves and automatic adaptation to measurement amplitudes;

11. Suitable for new Windows XP/Vista/Windows 7 operating systems;

12. Standard database management, supporting batch testing; Data analysis shall comply with GB/T228-2002 and be compatible with GB/T228-87 processing;

13. Load element: interval selection;

14. Speed range: As shown in the above table (special testing speeds can also be customized according to customer needs);

15. Walking space: As shown in the table above (excluding clamps, special testing spaces can also be customized according to customer needs);

16. Test width: As shown in the above table (special test widths can also be customized according to customer requirements);

17. Power supply: 동 220V/380V 50HZ;

18. Power: determined by the size of the model;

19. Machine size: As shown in the above table;

20. Machine weight: As shown in the above table.

5、 Host specifications:

1. High precision American transmission force sensor: interval optional. The power accuracy is within ± 0.5%.

2. Power system: American transmission sensor+imported AC servo motor+imported AC driver+Shanghai reducer+Taiwan, China ball screw++synchronous belt drive.

3. Control system: Pulse Command control method is adopted to achieve more precise control. Zhonglian board adjustment has fast coarse adjustment and slow fine adjustment functions. Automatically return to the origin and store after testing.

4. Display mode: Maxtest Professional Edition+WIN-XP testing software computer screen display.

5. A concise linear dual correction system with full range first gear and precise full range fourth gear force.

6. The luxury testing interface software can achieve control modes such as fixed speed, positioning movement, fixed load (with adjustable holding time), fixed load increase rate, fixed stress increase rate, and fixed strain increase rate, as well as multiple control modes to meet different testing requirements.

7. Full displacement: Encoder 2500 P/R, improving accuracy by 4 times, using LINE DRIVE encoder anti-interference ability *, displacement resolution 0.001mm. Small deformation: metal extensometer, resolution 0.001mm (optional).

8. Safety devices: overload emergency stop device, upper and lower travel limit device, leakage automatic power-off system, automatic breakpoint shutdown function.

6、 Machine accessories and computer configuration details:

1. One year warranty and one Chinese operation manual

2. Randomly give away a set of standard stretching fixtures

3. 1 9 'LCD display screen (brand computer)

4. 160GB hard drive

5. 1GB of memory

6. Core dual core processor

7. One HP color inkjet printer

8. The customer shall bring their own computer desk

7、 The characteristics of the measurement and display system are as follows:

Model: Screen Display System

Composition: AD800 Universal Measurement and Control Card+Software+Computer

Display: Computer monitor

Storage: File and database storage

Curve: Real time display of force time, force deformation and other curves, which can be scaled, cropped, printed, stored and operated on

Analysis: Strictly follow the experimental standards for analysis

Printing: Supports printers and editable report formats

Features: The software has a Windows operating interface and is easy to operate; With the help of computers, there is a large storage space; Our service tenet is automatic recognition, automatic resource allocation, and support for multi card and user satisfaction under Windows XP/Vista. Our after-sales service relieves all your worries. We firmly believe that a good enterprise sells not only good products, but more importantly, good service.

1. The supplier must supply the equipment in a timely manner according to the confirmed goods list by both parties and transport the equipment to the demander's unit.

2. The supplier shall calibrate the force values according to national standards, American standards, or relevant standards agreed upon by the supplier and demander before the machine leaves the factory, in order to meet the requirements of the demander.

3. The supplier shall randomly provide a machine operation CD.

4. Manufacturing and installation risks are the responsibility of the supplier. The transportation insurance is the responsibility of the supplier.

5. The product is serviced by our company's professional technical personnel for after-sales service.

6. Upon receiving a customer request, our company will provide a repair plan within 2 hours. If the customer cannot solve the problem on their own, we will provide on-site service within 2 working days.

7. Warranty for one year. If there are any quality issues with the product, our company will provide free repairs. If there is any damage caused by human factors, our company will only charge for transportation and no salary fees.