S3 type low flux small-scale microchannel reactor

S3 type low flux small-scale microchannel reactor(Suitable for universities/research institutes/factory users for teaching, scientific research, and initial testing of continuous flow processes).

1. This model is a series installation of multiple reactor modules, mainly designed for low flux laboratory applications;;

2. The reactor chip is made of pressureless sintered silicon carbide material with a purity of over 99.5% and strong corrosion resistance. The thermal conductivity of the material is about 130W/mK;

3. The reaction unit is a 3-layer silicon carbide plate structure, with independent reaction layers and heat exchange layers integrated into a whole through bonding technology, greatly improving the pressure resistance and heat exchange capacity; The exterior of the reaction unit is wrapped in a carbon fiber insulation shell, which improves the safety and temperature control accuracy of use; The internal reaction layer and heat exchange layer of the reactor chip are integrated inside the silicon carbide and adopt an integrated bonding packaging structure;

4. The chip size is 230mm * 150mm, and the internal reaction channel length is 4.92 meters; Channel cross-sectional size: 1mm-1.2mm, each chip has a liquid holding capacity of 8ml, and users can choose according to their needs; Flux range 0.5-5L/H;

5. The nominal working temperature is -30 ℃ -200 ℃, with a high pressure resistance of 20 bar;

6S3 type low flux small-scale microchannel reactorThe inlet and outlet pipes are designed as 1/8 PTFE pipes, which can be flexibly selected and matched; Each reactor module is designed with a two in one out connector, and the secondary inlet can be flexibly adjusted and used; The connecting pipes of each reaction unit are PTFE thickened pipes, installed in a compression type, pressure resistant, temperature resistant, and corrosion-resistant manner, with quick disassembly function; The connecting pipeline adopts a quick disassembly structure, which supports repeated disassembly (no deformation or leakage after more than 50 times); The pressure resistance of the connecting pipe itself is over 30 kilograms;

7. This model of reactor can install up to 8 sets of reaction modules, which can be flexibly customized according to needs; Standard multi-channel temperature display;

8. The main inlet and outlet of the unit's heat exchange medium are DN20 stainless steel inner wire joints, which are distributed in parallel to each module and can be flexibly adjusted according to demand (each module is equipped with a regulating valve).