Corrosion resistant back pressure valve for microreactors

Corrosion resistant back pressure valve for microreactors：

1. Used to provide back pressure to the outlet of microreactors, suitable for reactions that require pressure, especially gas-liquid reactions;

2. For gas-liquid reactions, gas usually quickly occupies most of the space inside the reactor after entering. In addition, the gas flow rate is high, which often leads to rapid gas outflow or liquid separation, greatly affecting the reaction effect;

3. Installing a back pressure valve at the outlet of the reactor can ensure that the reaction system operates at a certain pressure. After compression, the volume of the gas decreases, the flow rate slows down, and it can fully contact and mix with the liquid, thereby improving the reaction efficiency;

Corrosion resistant back pressure valve for microreactorsPerformance parameters:

1. High temperature: ≤ 90 ℃

2. High back pressure: 1Mpa

3. Pressure gauge material: PVDF+PTFE

4. Back pressure valve material: PVDF+PTFE

5. Inlet and outlet fittings: 1/8-inch or 3mm PFA tube or PTFE tube

6. Connection method: inverted cone joint

7. Internal pathway: PFA+PVDF+PTFE metal free