Rubber Compression Distortion Tester

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

*The compression skewness tester is used for static compression testing of microporous materials such as rubber and shoes. Take a standard test piece, clamp it between the flat plates of the device, rotate it with screws, compress it to a certain ratio, and then place it in an oven at a certain temperature (purchased separately). After a specified time, remove the test piece, cool it for a certain period of time, measure its thickness, and substitute it into the formula to calculate its compression deflection (compression deformation rate).

Product Details

*Compression skewness tester

*Compression skewness testerPurpose:Used for static compression testing of microporous materials such as rubber and shoes. Take a standard test piece, clamp it between the flat plates of the device, rotate it with screws, compress it to a certain ratio, and then place it in an oven at a certain temperature (purchased separately). After a specified time, remove the test piece, cool it for a certain period of time, measure its thickness, and substitute it into the formula to calculate its compression deflection (compression deformation rate).

*Compression skewness testerCompliant with standards:Meet the requirements of standards such as GB 7759 and GB/T20266;

*Compression skewness testerProduct Technical Specifications:

GB 7759Standard:

AType: Sample ￠ 29 ± 0.5 × D12.5 ± 0.5 mm

Compression ratio: 25%（Circular limiterThickness: 9.35mm)

Compression ratio: 15%（Circular limiterThickness: 10.65mm)

Compression ratio: 10%（Circular limiterThickness: 11.275mm)

Equipped with the above specificationsCircular limiter8 each

BType: Sample ￠ 13 ± 0.5 × D6.3 ± 0.3mm

Compression ratio: 25%（Circular limiterThickness: 4.75mm

Compression ratio: 15%（Circular limiterThickness: 5.35mm)

Compression ratio: 10%（Circular limiterThickness: 5.675mm