Rotronic CRP5 cleanroom dust-free panel transmitter

NegotiableUpdate on 05/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Rotronic CRP5 cleanroom dust-free panel transmitter, equipped with a diaphragm sensor for differential pressure measurement, is a high-quality device. Verified according to GMP requirements and carefully designed, CRP5 has been optimized for laboratory and cleanroom applications.

Product Details

Rotronic CRP5 cleanroom dust-free panel transmitter

A dust-free panel equipped with a diaphragm sensor for differential pressure measurement is a high-quality device. Verified according to GMP requirements and carefully designed, CRP5 has been optimized for laboratory and cleanroom applications. Optical buttons, magnet installation, and movable HC2-CRP humidity and temperature probes make cleaning work more effective and practical. Up to 6 measurement values and information can be displayed through their graphical colors. The displayed color can be adjusted separately. If there is a fault or exceeding the limit value, an alarm will be triggered, and the alarm information will be highlighted on the CRP5 display. It can also be transmitted in digital form through network communication protocols, Ethernet, or relays. Due to its ability for analog and digital communication, CRP5 can be easily integrated into any monitoring system. The comprehensive functionality of CRP5 enables it to be configured for every application. CRP5 features a sturdy glass panel and a movable humidity sensor, making it the top product on the market.

application

The CRP5 dust-free panel is undoubtedly a suitable choice for all differential pressure, humidity, and temperature measurements, as well as high-level cleanliness. CRP5 is particularly suitable for sterile rooms in hospitals, in the pharmaceutical, electronics, food industries, and other places where small pressure differences are detected. The comprehensiveness of CRP5 functionality provides solutions for various measurement and control tasks.

characteristic

Measure pressure difference, humidity, and temperature
Specially designed for sterile rooms
Mobile humidity and temperature probes make adjustment and cleaning easier
FDA - and GAMP compatible
Digital communication through Ethernet RJ45 and/or TCP/RTU network communication protocols
Free configurable analog input/output signals
Highly chemical resistant glass front panel
Optical operating components with protective gloves for operation

Rotronic CRP5 cleanroom dust-free panel transmitter

probe	HC2-CRP; Or: Any HygroClip2 probe
parameter	Micro differential pressure, temperature, relative humidity, digital and analog inputs
Scope of application	-5...60 °C (23...140 °F) / 0...100 %RH
Accuracy at 23 ± 5 ° C	± 1.0% full range (Pa)
Measuring principle	Diaphragm sensor
measurement range	±50Pa /±100Pa /±250Pa /±500Pa＆amp; 100-200Pa (depending on the probe)/0 100% RH
pressure resistance	0.7 bar (70,000 Pa)
Pressure connection	Front panel: hose connector Ø 6 mm x 10 mm Return: Hose connector Ø 4 mm x 10 mm
moderate	Air and non corrosive gases
Analog output accuracy	± 5 mV (voltage output); ± 20 μ A (current output)
Switching output	6 solid-state relays
switch capacity	Observe polarity at<2 A when<50 VDC <35 VAC is polarity independent at<1 A
zero drift	Compensation (manual or automatic zeroing)
Power supply/power consumption	20...48 VDC / 18...35 VAC <500 mA
electrical connection	Screw terminals on the back
measurement interval	1 s
display screen	Color TFT display screen
Menu Navigation	4 optical buttons
Firmware update	Through HW4 software
analog output	4. Can be freely configured
Analog output signal (standard)	0 / 4...20 mA or 0...1 / 5 / 10 V
load allowance	>10k Ω (voltage output) <500 Ω (current output)
communication interface	Ethernet (Modbus TCP, HW4)/RS-485 (Modbus RTU, HW4)
Service interface	UART
housing material	Front: Glass Return: Steel Plate
IP protection rating	Front end: IP65 (also equipped with sensors) Back: IP20
Flame retardant category	Complies with UL94-HB
Installation location	wall-mounted
FDA / GAMP	FDA 21 CFR part 11 / GAMP5
CE/EMC certification	EMC Directive 2004/108/EC
Storage and Transportation Conditions	-5...60 °C (23...140 °F) / 0...100 %RH
size	180 x 300 x 72 mm
weight	1,700 g (with humidity sensor) 1,550 g (without humidity sensor)

Rotronic CRP5 cleanroom dust-free panel transmitter