Michell Industrial Gas Analyzer

NegotiableUpdate on 05/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

XGA301 Michell Industrial Gas Analyzer can simultaneously measure oxygen, dew point, and other gas columns such as CO2, CO, and CH4. This analyzer is a placement analyzer that contains three additional sensors.

Product Details

XGA 301Michell Industrial Gas Analyzer

XGA 301Michell Industrial Gas AnalyzerIt can simultaneously measure oxygen, dew point, and other gas columns such as CO2, CO, and CH4. This analyzer is a placement analyzer that contains three additional sensors.

highlight

The sensor adopts zirconia technology, electrochemical, infrared and ceramic impedance technology
Variable speed pump (optional)
The cleaning function of zirconia sensors can run at any time
Intuitive HMI with backlit display
Two editable alarm outputs
2 x voltage output and 2 x 4-20 mA output
Digital RS232 output
The software package includes on-site charts and Excel ™ Compatible with data recording
Install embedded frames for specific panels of XGA301A1

XGA 301

XGA 301

Technical Specifications
analyzer
Operating temperature	+5 ~ +35°C
heating time	3~4 minutes @+20 ° C
Z高intake air temperature	+50°C
Sample gas flow rate	0 to 1.2 Nl/min, Users can adjust the pump
High intake pressure	1 hour
display	XGA301A1/A2:16 x 2 character (9mm) back-lit LCDM XGA301A3:20 x 4 character (9mm) back-lit LCD
sampling port	Standard:4mm ID/6mm OD threaded interface - gas interface front panel Rectus ™ Or Swagelok ® 6mm card sleeve, back Optional: XGA301A1
Dimensions (H x W x D)	XGA301A1:290 x 250 x 250mm (11.4 x 9.8 x 9.8”) Panel-mount XGA301:4U (177) x 300 x 290mm XGA301A2/A3:195 x 355 x 340mm (13.8 x 10.4 x 5.9”).*
weight	XGA301A1:3.5kg XGA301A2/A3:4 ~ 5.5kg

*Large size including needle valve and extension cable

Electrical parameters
analog output	2x 4-20mA output, configurable for any installed sensor 2x alarm 2 x 0–10 V (XGA301A1 only) 2 x 0–5 V (XGA301A2/A3 only)
digital output	RS232 ASCII
power supply	90–260 V AC, 50/60 Hz

Humidity and pressure sensors
sensor type	Dew point of water*	Pressure (2m lead), remote sensor
precision	± 2 ° Cdp of reading	<Standard full range ± 0.25%, accuracy improvement Additional costs are required for amounts as high as 0.1% and 0.05%
range	-65 ~ +20°Cdp -100 ~ +20°Cdp	0-5 bars 0-10 bars

*Please refer to the Easeside Transmitter parameter table for the complete specifications

Sensor selection and specifications
sensor type	zirconium oxide	electrochemistry				comfort me
Measuring gases	O₂	O₂	O₂(Low range)	CO	CO (H₂Currently)	CO₂	CH₄	CO
precision	± 1% of the reading (Scale) or 0.5ppm Choose the higher one	Full range ± 1% @ 25 ° C 1013mbar	Full range ± 2% @ 25 ° C 1013mbar			Full range ± 2% @ 25 ° C 1013mbar
inlet pressure	Large 1 barg	0.7 – 1.4bara				0.7 – 1.4bara
response time	T90 approximately 5 seconds (gas flow rate of 1 Nl/min-1)	T90 takes approximately 30 seconds				T90 takes approximately 30 seconds
stability	± 2% of monthly readings					± 2% of the measurement range (over 12 months)
service life	>17500 hours	~10 years				~10 years
0-1OO%						✔	✔	✔
0-30%	✔ The output can be configured by the user to 0-10ppm, Z high Up to 0-30%	✔				✔	✔	✔
0-10%						✔	✔	✔
0-5%						✔	✔	✔
0-3%						✔	✔	✔
0-1%			✔			✔	✔	✔
0-5000ppm				✔		✔	✔	✔
0-2000ppm				✔	✔	✔	✔	✔
0-1000ppm				✔	✔	✔	✔	✔
0-500ppm				✔	✔	✔	✔	✔

Michell Industrial Gas Analyzer

Overview

Product Details

highlight

Technical Specifications

Sensor selection and specifications