Rotary Forklift in Shenzhen

Important component configuration of accessory products

1. In terms of hydraulic system: the oil cylinder adopts imported original hydraulic control one-way valve; The sealing components are all imported products, and the high-pressure rubber hose adopts high-performance imported rubber hoses with conical sealing.

2. In terms of structural components, the fork frame is welded from high-performance alloy steel plates.

2. In terms of mechanical performance, it can achieve a forward tilt of 45 ° and a backward tilt of 19 °. By adding a hydraulic control check valve to the oil cylinder, it can maintain pressure for a long time, ensuring safety during operation or when the hose bursts.

3. Application scope: Suitable for transporting/dumping various circular wood and fabrics, reducing logistics costs and significantly improving production efficiency.

More than four yearsShenzhen ForkliftJust like when a person reaches middle age, many spare parts will wear and loosen normally, especially forklifts that have been overloaded for a long time before. In addition, various rubber hoses inside the car have also reached the age of natural aging and other issues. For a middle-aged vehicle, in addition to regular maintenance, special attention should be paid to the maintenance and repair of the following components:

1. The clutch plates, pressure plates, release bearings, flywheel discs, etc. of the manual wave forklift need to be inspected and replaced.

2. Most forklifts at this stage require the replacement of solid tires, but the specific decision depends on the site and usage situation to prevent tire slippage and accidents.

3. Hydraulic system: hydraulic oil pump wear or oil leakage, high-pressure oil pipe joint leakage, multi way valve oil leakage, steering gear and oil cylinder oil leakage, etc. Need to repair or replace as soon as possible.

4. Rubber hose: During this age stage of the vehicle, problems such as black oil leakage and water leakage often occur. This is caused by the natural aging of the rubber tube and needs to be replaced in a timely manner.

5. Vehicles for automatic wave forklifts: wet clutch plates, gearbox overhaul, etc.

6. Water tank: It usually needs to be replaced after 5-7 years. Due to long-term work, it is prone to frequent water leakage and shortage, which can cause serious situations such as engine cylinder pulling.