Rexroth CNC System Maintenance Case and Daily Maintenance

Disadvantages: Low processing efficiency, especially for non-ferrous metals such as titanium carbide. Perforating machines are mainly used for piercing small air holes, with high efficiency and low accuracy. They are generally used as wire cutting machines. How to solve the problem of electric discharge drill bits? What are the reasons for wire breakage in aluminum wire cutting? The electrode materials commonly used for processing blind holes are copper graphite and copper tungsten alloy.
Rexroth CNC System Maintenance Case and Daily MaintenanceOur company, with technical strength and high professionalism in the field of CNC system maintenance, breaks through brand and model barriers and provides full coverage maintenance services for mainstream CNC systems worldwide, including Haas, Demag, Rexroth GE、ABB、 Brands such as Siemens, Panasonic, Yaskawa, Huazhong, Guangtai, etc.

Thus achieving the entire process of cutting workpieces, the entire working principle of molybdenum wire cutting EDM is to cut the workpiece according to the customer's requirements, input the cutting programming settings on the console, then place the wire, install the guide wheel, put the wire and wire together, and then place the workpiece to be cut on the workbench, install the nozzle, and place the insulation board.
After the photocathode plate is a series of additional metal plates called dynodes, each of which is at a continuously larger positive potential, providing kinetic energy for the attracted electrons. Every time an electron hits the electrode with high energy, more electrons are emitted in a process called secondary emission. The result of secondary emission is that for each individual photon hitting the photocathode, a large number of electrons reach the end plate (called the anode): the tube effectively increases the effect of each photon to achieve high sensitivity. The relatively strong current pulses measured at the anode indicate that the tube receives each photon: a simplified photomultiplier tube and power circuit are shown here: in actual instruments, microamperes will be replaced by amplifier circuits, generating strong electrical signals that directly respond to the received light intensity. In the case of a particle size analyzer, the output signal of the amplifier becomes a representative of the indoor SO2 molecule concentration. Like any other type of leak detector technology, we must be aware of potential interfering substances as we use fluorescence to detect the concentration of species out of interest.
Rexroth CNC System Maintenance Case and Daily Maintenance
CNC system keyboard unable to input fault reason
1. Hardware malfunction: The circuit board of the keyboard itself may be damaged, leading to key failure; The connecting wires between the keyboard and the CNC system may be loose, oxidized, or broken, affecting signal transmission; Damaged internal components such as resistors and capacitors can also cause the keyboard to malfunction.
2. Software issues: System software crashes, driver errors, or configuration errors may result in the loss of keyboard functionality; Improper system updates or incompatible versions may also cause keyboard malfunctions.
3. Power supply issue: Unstable or insufficient power supply can affect the normal operation of the keyboard; Damaged power modules or unstable output voltage can also cause the keyboard to be unable to input.
4. External interference: The CNC system may be affected by external electromagnetic fields, leading to abnormal keyboard signals; The temperature, humidity, and dust in the work environment may also have adverse effects on the keyboard.
Clean the filter, clean the oil tank, replace or filter the oil, if possible, replace the seals, 4. Tighten all transmission parts, replace defective fittings, 5. Lubricate the parts with grease as required, 6. Clean and clean all transmission surfaces, 7. Check the status of the tool magazine and robotic arm, and analyze the wear condition of the robotic arm.

The flow of the carrier gas and the switching of the sample components to the limiting column marked with 1 in the triangle in the second column can further separate the components or only serve to restrict the flow. By analyzing that the flow rate of the flow path depends on the supply pressure of the carrier gas (constant) and the limitations flowing through the entire analysis flow path. Therefore, the second chromatographic column in the dual column configuration must have the same flow restriction as the chromatographic column switched from the analysis flow path. By going to the detector and then activating the dual column valve, the carrier gas flow returns through the original column to separate the lighter components, and then brings them to the detector. After the components are separated, the GC six way valve detector is passed through the chromatographic column and then through the detector. There are several types of detectors available for gas-phase particle size analyzers, including flame ionization detectors (for ppm level hydrocarbons) and flame photometric detectors (for ppb to ppm level sulfur detection), but the most commonly used detector in hydrocarbon gas measurements is the thermal conductivity detector (TCD).
Rexroth CNC System Maintenance Case and Daily Maintenance
CNC system keyboard unable to input fault repair method
1. Check the power supply and connection: Confirm that the power supply of the CNC system is normal, check whether the keyboard connection cable is loose or damaged, re plug and unplug the connection cable to ensure a stable connection. If the connection cable is damaged, replace it with a new one.
2. Hardware testing: Open the keyboard casing and check if there are any damage or burnt marks on the internal circuit board. Use a multimeter to check if the components on the circuit board are normal, such as resistors, capacitors, etc. If the components are damaged, they need to be replaced.
3. Software troubleshooting: Restart the system for software self-test and monitor for any error messages; Check the system firmware version and upgrade it if necessary; Check software settings to ensure that there are no disabled inputs, use antivirus software to check and eliminate virus interference.
4. Environmental inspection and optimization: Confirm whether the surrounding environment of the equipment interferes with the operation of the system, such as high temperature, high humidity, or the presence of dust. Clean up dust and oil stains, maintain good ventilation and humidity, and provide good external conditions for the operation of the CNC system.

Just like a saw, the disadvantage is that it can only be machined up and down through parts. The working principle of a wire cutting machine is to use a moving metal wire as the tool electrode, apply pulse current between the metal wire and the workpiece, and use the corrosive effect of pulse discharge to cut the workpiece. As a wire electrode is used, it can only be used for contour cutting.
The rib body has strong rigidity, is not easily deformed, has wear resistance, and overall accuracy and stability far exceed other brands of grinding machines with the same specifications of high rigidity and large-span slide rail design. The precision guide rail has good rigidity and stability after grinding, and strict protective measures ensure the safety of the guide rail and precision screw, making the accuracy and operating performance of the machine tool stable. Turcite-b guide rail wear plates are pasted on the front and rear of the saddle and the left and right guide rail surfaces of the worktable.
Bxbsl