Residual voltage meter

Compliance West CDT-240Residual voltage meterCapacitive Discharge Tester Compliance West CDT-240 Discharge Tester from the United States

The Compliance West CDT-240 capacitor discharge tester is used for residual voltage testing after IEC plug disconnection. It disconnects the line at the peak voltage and analyzes the results according to various standards to quickly obtain results. Oscilloscope output for viewing attenuation waveforms.

Compliance West CDT-240 Capacitor Discharge Tester from the United States

featureCompliance West CDT-240 Capacitive Discharge Tester

• Accurate; According to CTL voltage and time specifications.

• At positive or negative peak values, disconnect the input test voltage in both normal and reverse directions

• Test line ground, line neutral, and neutral ground.

• Microcontroller technology, one click testing, easy setup, LCD display indicating test results.

• Rated test current 8A, 15A optional.

• Ergonomic design, safety, speed, and efficiency.

• Designed for product development, production, and laboratory use.

• A sturdy structure that can withstand a 6 "drop without damage.

• Including cables, manuals, and calibration certificates.

Specifications

Test voltage: 90/264 Vrms
Test current: 8A, 15A option
Fuse: 10A, 250V, time delay, 1-1/4 "× 1/4"
Probe impedance:>100 Mohm,<25pF
AC peak detection accuracy: EUT disconnects within 5% of the peak power supply voltage
Test time range: 0.5?? ten
Voltage setting range:+/-30 to 388V
Voltage setting resolution: 1V
Test time accuracy:+/-5%
Voltage meter accuracy:+/-2% of reading+/-0.8V
Frequency: 50-60Hz
electrical
Rated input voltage: 110-240V
Frequency: 50/60 Hz
Fuse: 2A, 250V, time delay, 5 × 20mm
environment
Working temperature: 15-40 ℃
Relative humidity range: 0-90% non condensing
safety
(XI) Safety interlock 2-pin terminal block for tester operation
average
Dimms： 9-1 / 4“W×4-3 / 4”H×10“D
Weight: 5.8 pounds
BNC output: reference ground, 100:1 measured voltage