Residual chlorine analysis instrument combination

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The residual chlorine analysis instrument combination has high intelligence and flexibility, and can simultaneously measure residual chlorine and temperature. It is widely used in urban sewage treatment plants, power, water supply, medicine, chemical, food and other industries to continuously measure residual chlorine in water; Equipped with residual chlorine electrode and flow cell for use.

Product Details

Basic functions of residual chlorine analyzer

1. Diverse languages, factory standard Chinese interface, switchable English interface.

2. There are various temperature compensation methods available, including PT1000 NTC10K and manual temperature compensation.

3.4-20MA output, using isolation technology, with strong anti-interference ability.

4. The high and low points of the two sets of relays can be switched freely, and the hysteresis can be adjusted freely to avoid frequent on-off of the relays.

5. Password management function to prevent misoperation by non professionals.

6. The menu prompt function greatly facilitates user operation.

Technical parameters of residual chlorine analyzer

Measurement range: 0-20 ppm, 0.0-20.0 ppm, 0.00-20.00 ppm

Accuracy:+0.01 ppm

Resolution: 0.01 ppm;

Stability: ≤ 0.02 ppm/24 hours;

Temperature compensation: 0-100 ℃ manual/automatic (PT1000/NTC10K)

Signal output: 4-20mA isolated protection output, maximum load 500 Ω

Alarm output: Two groups can correspond to high and low point alarms (3A/250 V AC) at will, with normally open contact relays

Power supply: AC220V or DC24V

Power consumption: ≤ 5W

Environmental conditions: (1) Temperature 0-60 ℃ (2) Humidity ≤ 85% RH

Dimensions: 96 × 96 × 132mm (height × width × depth)

Hole size: 92.5 × 92.5mm (height × width)

Protection level: IP65