-
E-mail
zr@zsasj.com
-
Phone
15062688501
-
Address
299 Youbi Road, Kunshan City, Jiangsu Province
Product Categories
Suzhou Anshijia Machinery Co., Ltd
Reactor water-cooled chiller
NegotiableUpdate on 11/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The reaction kettle water-cooled chiller is mainly used for cooling the reaction kettle. Whether it is a jacket type or a snake tube type reaction kettle, this chiller can be used. When selecting, it is calculated based on the volume of the reaction kettle, the specific gravity and heat of the material, and the cooling time. When cooling the reaction kettle, the set temperature of the chiller needs to be more than 10 degrees lower than the target temperature of the material.
Product Details
The reaction kettle water-cooled chiller is mainly used for cooling the reaction kettle. Whether it is a jacket type or a snake tube type reaction kettle, this chiller can be used. When selecting, it is calculated based on the volume of the reaction kettle, the specific gravity and heat of the material, and the cooling time. When cooling the reaction kettle, the set temperature of the chiller needs to be more than 10 degrees lower than the target temperature of the material.
| SJ-40WF | ||
| refrigeration power | kcal/hr(50Hz) | 113520 |
| power supply | V | 3∮ 380～380V- 50HZ |
| operating current | A | 59 |
| refrigerant | Kind | R407C/R404A |
| FILLING QUANTIT（kg） | 20 | |
| compressor power | KW | 26.4 |
| Number of compressors | 4 | |
| cooling water flow | m3/h | 32 |
| water pump | KW | 4 |
| Freezing flow rate | m3/hr | 23 |
| Standard pipe diameter | MM | 80 |
| Design dimensions | L（mm） | 2400 |
| W（mm） | 1000 | |
| H（mm） | 1650 | |
| weight | kg | 910 |
The water system of the reaction kettle water-cooled chiller is made of all stainless steel material to ensure the cleanliness and hygiene of the water system. The remote control of the chiller unit can be externally connected to the main control program of the reactor to achieve fully automatic control.
Notes:
1. When using a reaction kettle water-cooled chiller, attention should be paid to the height of the inlet and outlet of the kettle cooling water. If it is higher than the inlet and outlet of the selected model of chiller, a check solenoid valve needs to be installed.
2. If the volume of the reaction kettle is large, it is necessary to add a larger capacity insulated water tank outside the chiller. Pay attention to installing valves at the inlet and outlet positions of the water tank and reaction kettle to retain the cooling inside the water tank when cleaning the reaction kettle.
3. When the set temperature is above 0 degrees, underground water is prohibited from being used as cooling water. When using tap water, please keep the water replenishment valve open.
Notes:
1. When using a reaction kettle water-cooled chiller, attention should be paid to the height of the inlet and outlet of the kettle cooling water. If it is higher than the inlet and outlet of the selected model of chiller, a check solenoid valve needs to be installed.
2. If the volume of the reaction kettle is large, it is necessary to add a larger capacity insulated water tank outside the chiller. Pay attention to installing valves at the inlet and outlet positions of the water tank and reaction kettle to retain the cooling inside the water tank when cleaning the reaction kettle.
3. When the set temperature is above 0 degrees, underground water is prohibited from being used as cooling water. When using tap water, please keep the water replenishment valve open.
 |
 |
Q: When the material inside the reaction kettle needs to be cooled to 0 degrees, what temperature should be set for the cooling water?
Answer: Hello! Because the reaction kettle is mainly divided into jacket type and serpentine coil type, both of these methods have relatively poor heat transfer efficiency. Therefore, the temperature difference between the cooling water and the material needs to reach 10 degrees or even greater, usually set to around -15 degrees, or the temperature sensor of the chiller can detect the material temperature (when detecting the material temperature, set the material target). In addition, ethylene glycol solution or other low-temperature media need to be used for cooling water.
Answer: Hello! Because the reaction kettle is mainly divided into jacket type and serpentine coil type, both of these methods have relatively poor heat transfer efficiency. Therefore, the temperature difference between the cooling water and the material needs to reach 10 degrees or even greater, usually set to around -15 degrees, or the temperature sensor of the chiller can detect the material temperature (when detecting the material temperature, set the material target). In addition, ethylene glycol solution or other low-temperature media need to be used for cooling water.
