- Phone
-
Address
Jinnan Entrepreneurship Building
Product Categories
Anli 3D (Tianjin) Technology Co., Ltd
Rapidox 1100E Oxygen Analyzer
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Rapidox 1100E oxygen analyzer uses an electrochemical oxygen sensor for high percentage oxygen content analyzers ranging from 0 to 100%. Electrochemical sensors are ideal for analyzing trace oxygen or high percentage oxygen content when detecting the presence of VOCs, combustible gases, CO, H2, or He in the gas. Built in pressure compensation technology, large screen 20 x 4-character OLED display.
Product Details
Characteristics of Rapidox 1100E Oxygen Analyzer
- Oxygen measurement technology using electrochemical oxygen sensors
- Built in pressure compensation technology ensures fast detection results.
- The calibration steps are simple.
- Low maintenance requirements and long sensor lifespan.
- Two user programmable alarms
- *Programmable digital and analog outputs
- The software suite can achieve * control of instruments, with real-time charts andExcelCompatible data recording function.
Rapidox 1100E Oxygen AnalyzerProduct Description
- Rapidox 1100Eoxygen analyzerUse an electrochemical oxygen sensor for analyzing high percentage constant oxygen from 0 to 100%. When detecting VOCs, combustible gases CO、H2 When He is present, electrochemical sensors are an ideal choice for analyzing trace oxygen or high percentage oxygen content.
- power supply voltage90-260VACIt can be used anywhere in the world.
- You can choose front intake, rear intake, or rack mounted.
- Optional long-life vacuum pump or vacuum drainage pump.
- Password protection function
- Follow instructionsEMC Directive 2004 / 108 / EC. UL/ETL Certification Number: UL-61010-1
- Rapidox 1100Eoxygen analyzerRemote signal output can be used to regulate the oxygen content of process gases by controlling external proportional valves or solenoid valves.
Rapidox 1100E Oxygen Analyzertechnical parameters
Range: 0-100%
Gas interface detection: 4mm ID/6mm OD
Preheating time:3-5 minutes
Voltage output:User programmable 0-10V
Current output:User programmable linear 4-20mA
Digital output: RS232, RS485, Modbus RTU or Ethernet
High intake pressureAbsolute pressure: 9000-1100 mbar
Upper limit of gas temperature detection: 40 ° C
Operating Temperature5 ° C to 35 ° C
Pump options: diaphragm pump or drainage device
Display:20 x 4-character OLED display
Power supply voltage:90-260VAC, 50/60Hz
Overall dimensions:台式: 150mm(H) x 253mm(W) x 272mm(D)； 盘装： 300 x 4µ (177mm(H) x 300mm(W))
Weight:3.5kg (with installation panel 4kg)
