Rapid CS Cube Element Analyzer

rapid CS cube

Specialized sulfur analyzer

With a long history of CHNS and O element analysis, Elementar has developed a carbon sulfur analyzer that combines excellent analytical performance and high automatic sample flux.

The typical features of our elemental analyzer are sample processing through granulation or the use of tin bags, as well as fully automated injection into the high-temperature combustion zone. Can quickly and sensitively determine SO through an IR detector₂/CO₂It can be said to be specially designed for the analysis needs of carbon and sulfur (such as in coal, soil, or waste). The equipment has the characteristics of being particularly sensitive and easy to operate

C. S and CS modes (using IR to detect SO)₂）Suitable for all solid and liquid organic samples, as well as most inorganic samples. CI mode can be upgraded with C, S, and CS modes.

Quantitative high-temperature decomposition:
At a constant temperature of nearly 1200 ° C and during the combustion process at 1800 ° C. The sulfur in the sample is completely converted to SO in a pure oxygen environment₂Even BaSO₄It can also achieve a 100% recovery rate. Carbon conversion to CO₂And detected with the help of a true non dispersive IR photometer.

Large dynamic concentration range:
With just one IR detector and sensitivity range, the measurement range can reach 0-100% or 20 milligrams of absolute sulfur content. The measurement range of carbon is 0-100% or up to 40 milligrams of absolute carbon content. It can even detect sulfur with a concentration of less than 1 ppm or a content of less than 0.2 micrograms.

Large sample range:
Depending on the sample type, samples ranging from trace amounts (<1 mg) to macro amounts (1 g) can be processed

Automatic analysis run:
The integrated sample tray can accommodate 60 large samples for the instrument to analyze automatically overnight. The sample tray can hold up to 120 samples (such as coal). The liquid sample can be sealed in a tin bag and placed into an automatic sampler.

All instrument parameters can be accessed through Windows on the PC^®control
The entire instrument can be controlled digitally and operated through networking. Optional features that comply with 21 CFR 11 regulations are available to ensure data security.

High sample throughput and low analysis cost:
Up to 120 samples can be analyzed within approximately 10 hours without the need for supervision. The analysis cost is extremely low. The combustion furnace comes with a ten-year warranty.

Chlorine detection options
Using electrochemical detectors to detect chlorine elements;
The detection range is 0-5 milligrams of chlorine

Sample tray:
In addition to the 60 position sample tray (up to 1 gram per sample), there are also options for 120 positions (up to 300 milligrams per sample) or 80 positions (up to approximately 50 milligrams per sample)

Control and evaluation device:
Install Windows^®PC, monitor, printer, and connecting cables for operating software (basic configuration required for device operation).

Pressure relief valve:
Two levels, used for oxygen cylinders

Electronic balance:
Readability of 0.1 milligrams or 0.01 milligrams, with display interface

Tin bag sealer:
Used to pack liquid and air sensitive samples into tin bags and perform airtight sealing, including consumables for making approximately 100 liquid samples

Solid sample former:
Manual tools for compressing samples in tin foil or tin cups, and mechanical extrusion tools for wrapping samples in paper for granulation

UPS interface:
Can be connected to a 'low-power UPS' to protect the instrument in case of short-term power failure

Tin foil cup:
Used for wrapping solid samples

Tin bag:
Used to hold liquid samples

Paper:
Used for packaging sample granulation

Consumables set:
The standard version already includes the materials required for 1000 analyses;
Consumables set required for approximately 4000 analyses

Small vulnerable parts set:
A complete set of quick and easy to replace joints, couplings, and filters

Of course, various consumables can also be ordered separately.