Rail alignment measuring device

Rail alignment measuring deviceService target: Inspection vehicle

Measurement function: Inspection system alignment guidance

Homework speed: 120km/h

Rail alignment measuring deviceServing flaw detection vehicles, applied in the construction of on-board rail flaw detectors for large machinery sections. By installing a centering system at the front end of the flaw detector on the flaw detection vehicle, it is ensured that the ultrasonic sensor of the flaw detection vehicle is always stored above the rail surface during the construction process, and is not affected by the snake like motion and rail curve during vehicle operation, ensuring the effectiveness of the entire flaw detection process of the flaw detection vehicle.

At present, ultrasonic testing is mainly used for rail inspection. The inspection wheel needs to be accurately coupled with ultrasonic waves on the track centerline to ensure that the echo of rail damage can be obtained, and the type and location of rail damage can be determined. The Ketianjian Rail Inspection Alignment Measurement System is a measurement system based on high-speed photography technology. It measures the deviation of the probe wheel relative to the center position of the rail in real time, and uses the measured deviation value to guide the inspection probe to adjust its position, achieving automatic alignment and effective rail inspection.

Product Features

1. High degree of automation;

2. High detection efficiency (applicable to 160km/h);

3. Traceability of detection data;

4. Good repeatability;

5. Able to work 24/7;

6. Strong anti-interference ability;

7. Can adapt to different track types for testing:

8. Good environmental adaptability, suitable for use in the south, north, and plateau.