Qualified electromagnetic flowmeter

Qualified electromagnetic flowmeterThe measurement principle is based on Faraday's law of electromagnetic induction,Composed of sensors and converters, the sensors are installed on the measuring pipeline, and the converters are installed within 30 meters or 100 meters of the sensorsshielded cableconnectionThe main components of the sensor are: measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. Used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Such as water, sewage, mud, pulp, various acids, alkalis, salt solutions, food slurries, etc., are used in industries such as petroleum, chemical, metallurgical, textile, food, pharmaceutical, papermaking, as well as environmental protection, municipal management, water conservancy construction, etc. to measure high temperature, high humidity, and difficult to observe environments.
IIQualified electromagnetic flowmetercharacteristic
1. Suitable for volumetric flow measurement of conductive fluids with conductivity greater than 5 ц s/cm.
2. There are no active or obstructed components inside the measuring tube, and the pressure loss is small
3. Lining and electrodes with different materials have good anti-corrosion performance
4. Not affected by medium, density, viscosity, temperature, pressure, and conductivity
5. Low frequency rectangular wave excitation, less susceptible to interference, stable and reliable
6. Converter has low energy consumption, simple and convenient installation, and users do not need to debug

Fully digital processing, strong resistance, reliable measurement, high accuracy, and a flow measurement range of up to 150:1

Ultra low EMI switching power supply, suitable for a wide range of power supply voltage changes, with good EMI resistance performance.

Adopting a 16 bit embedded microprocessor, it has fast computing speed, high accuracy, programmable low-frequency rectangular wave excitation, improved stability of flow measurement, and low power consumption.

Using SMD devices and surface mount technology, the circuit has high reliability.

There are no movable parts or flow blocking components inside the pipeline, and there is almost no additional pressure loss during measurement.