Pulse dust collector with six screws connected to membrane dust filter cartridge 325 * 660

Pulse dust collector with six screws connected to membrane dust filter cartridge 325 * 660

Specially designed for pulse type dust collectors,Six screw flange installation、PTFE 覆膜、φ325×660mm, Main focusHigh filtration accuracy, high pressure dust removal resistance, strong sealing, easy maintenance.

1、 Core parameters (standard version)

• Size:Outer diameter φ 325 × height 660mmThe inner diameter of the interface is 215mm

• connect:Six screw flange installation (6 × M8)Suitable for flower board openings 330-335mm

• Filter material: Japanese Toray polyester base fabric+PTFE microporous film coating，0.3 μ m accuracy, efficiency ≥ 99.99%

• Filter area: approximately7.3 ㎡/pieceAdapt to air volume800–1200m³/h

• Skeleton: 5mm+galvanized diamond mesh/304 stainless steel mesh,Pressure difference ≤ 0.6MPa

• Temperature resistance:-10℃～85℃(Short term temperature of 100 ℃); Dust cleaning pressure:0.4–0.6MPa

• Sealing: 11mm wide fluororubber/chloroprene rubber ring,Leakage rate<0.1%

• 
  

2、 Key characteristics (pulse condition enhancement)

1. Six screw strong seal6 M8 screws evenly distributed,Anti high voltage pulse blowbackLong term operation without air leakage or cover detachment.

2. High efficiency and low resistance film coatingPTFE surface filtration,Dust is not embedded in the filter materialPulse cleaning; Initial resistance ≤ 120Pa, long-term resistance ≤ 180Pa,20% energy-saving compared to ordinary filter cartridges+.

3. Anti oil, waterproof, anti-staticOil and water repellent process,Resistant to oil mist and moistureAdd conductive fibers with a surface resistance of 10 ⁶ -10 ⁹ Ω,Suitable for welding smoke/explosion-proof working conditions.

4. Durable and long-lastingThickened end cap+high-strength skeleton,Anti suction collapse, wear-resistantCan be washed and reused, with a longer lifespan than ordinary filter cartridgesExtend by 1.5 times.

3、 Adaptation scenario

• Original replacement of pulse filter cartridge dust collector/new equipment matching;

• Welding smoke, grinding, polishing, cutting, etcDry/wet mixed fine dust；

• Steel mills, machinery factories, sheet metal factories, spraying workshops, woodworking dust removal, etc.

4、 Installation and maintenance

• Adaptation: inner diameter 330-335mm flower board,Six screw alignment lockingCompact the sealing rubber ring;

Pulse dust collector with six screws connected to membrane dust filter cartridge 325 * 660