-
E-mail
3330545829@qq.com
-
Phone
19907484062
-
Address
No. 32 Yulian Road, Xuexue Street, Yuelu District, Changsha City, Hunan Province, China
Product Categories
Hunan Wangxuan Technology Co., Ltd
Pulling tester
NegotiableUpdate on 01/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Proceq DY225 tensile tester is the flagship model in the DY-2 series, and its basic operation is consistent with DY206 and DY216. Its stronger performance determines that this product can be used in more scenarios. DY225 is mainly suitable for high-strength testing projects such as bridge reinforcement and steel structure bonding.
Product Details
1DY-225Pulling testerpurpose
Used to test the bonding strength of coatings and protective layers, the bonding strength of repair materials (such as fiberglass), and the tensile strength during concrete refurbishment.
IIDY-225Pulling testerTechnical Specifications
2.1 Scope of work: 1.3 to 12.7 MPa (185 to 1847 psi)
2.2 Tensile strength (50 mm test disk): 2.5 to 25 kN (562 to 5620 Ibf)
2.3 Maximum travel: 5 mm
2.4 Maximum tensile speed: 2.2 millimeters per minute (0.086 inches per minute)
2.4 Instrument firmware: maximum load, actual load rate, test duration, complete test report, failure mode report, complete data review of the instrument
2.5PC software: Real time view of DY-2 link actual load rate graph
2.6 Memory: 100 measurements
2.7 Connection: USB to PC and used for charging
2.8 Calibration accuracy: EN ISO 7500-1 Level 1 (± 1% for 20% of maximum force)
2.9 Battery capacity: 1500 mAh, 3.7V (minimum 80 measurements)
2.10 Weight: 4.5 kilograms
