Protection of storage tanks and containers by recognized anti arch explosive disc IG-IKB-LP

NegotiableUpdate on 05/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The IG-IKB-LP anti arch blasting disc is recognized for its protection of storage tanks and containers. These blasting discs (in the application) have been proven to be high-pressure and vacuum resistant passive release devices. Compliant with European PED requirements and covering all certifications worldwide, including TUV and ASME VIII levels, they offer the possibility of avoiding expensive installation and repetitive inspections of operating systems when operating pressures are below 0.5 bar (PED) and 14.5 gauge (ASME)

Product Details

Protection of storage tanks and containers by recognized anti arch explosive disc IG-IKB-LP
The IG-IKB-LP anti arch blasting disc is recognized for its protection of storage tanks and containers. These blasting discs (in the application) have been proven to be high-pressure and vacuum resistant passive release devices. Compliant with European PED requirements and covering all certifications worldwide, including TUV and ASME VIII levels, they offer the possibility of avoiding expensive installation and repetitive inspections of operating systems when operating pressures are below 0.5 bar (PED) and 14.5 gauge (ASME).

Anti arch blasting discs for the protection of tank containers with low blasting pressure

IG-IKB-LP isThe ideal solution for protecting atmospheric pressure storage tanks, compared to the pollution caused by other metal and graphite bursting discs during the process. A blasting level with an operational ratio of 90%. Adequate venting area is maintained at all pressure levels while ensuring no debris. IG-IKB in anti arch design-LPCompletely resistant to vacuum, making it suitable for applications ranging from vacuum to positive pressure detonation. SST and SST alloy materials are available for selection, ranging from thin sheets or sheets of inventory materials. The IG-IKB-LPThe design and installation of flange plates are completely torque independent.

MINIMUM BURST PRESSURE

0.5 bars

SIZES

25 - 100 mm

MAXIMUM PERMISSIBLE OPERATION PRESSURE UP TO

90%

MOUNTING

with integrated holder

Features

single-layer
reverse acting
Full Vacuum Resistance
Full Vent Area
Fragmentation-Free
Smooth Process Side
Diffusion-Free Sealing
high Lifetime
Suitable for Pulsating Pressure
Sanitary Design

Applications

Materials

Customer Benefits

Downloads

Quality and Certifications

Security process

In addition to quality and reliability, REMBE provides products based on environmental technology and international standards. The testing and certification of bursting discs are manufactured according to PED standards. Each batch (many) of products meets the requirements of 97/23, such as PED individual test certificates, and compliance testing is provided in accordance with DIN EN 10204-3.1. The design, size, and selection of bursting discs shall comply with the requirements of DIN EN ISO 4126-2 PED, 4126-6, AD2000 merkblatt-a1, ASME Section VIII, Div1, and API Standard 520, Part 1 (as applicable). In addition, REMBE can customize and choose the appropriate size and suitable bursting disc. Production/compliance with the following standards: ISO 9001:2008, ASME Sec VIII, Div1, KAT 1041, GOST PPC00-14869 (Russia), promatomnadzor 05-119-2006 (Belarus), China Special Equipment License (CML), KOSHA (Korea), NFPA，ATEX BVS03 / ZQS / E210, PED, CSA40