Programmable constant humidity test chamber

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Programmable constant humidity and humidity test chamber, mainly used to simulate harsh high temperature, low temperature, or humid and hot environments that may be encountered during transportation, storage, and use of electronic instruments, new materials, electricians, vehicles, metals, electronic products, aerospace materials, etc; In environments with alternating high temperature, low temperature, and humid heat, materials, accessories, or equipment are tested for their resistance to high temperature, cold, and humid heat, as well as the potential reduction in their lifespan due to damage.

Product Details

Product Introduction:

Programmable constant humidity test chamberIt is mainly used to simulate harsh high temperature, low temperature, or humid and hot environments that may be encountered during transportation, storage, and use of electronic instruments, new materials, electricians, vehicles, metals, electronic products, aerospace materials, etc; In environments with alternating high temperature, low temperature, and humid heat, materials, accessories, or equipment are tested for their resistance to high temperature, cold, and humid heat, as well as the potential reduction in their lifespan due to damage.

可程式恒湿恒湿试验箱

Programmable constant humidity test chamberBox Structure

1. Inner box material: SUS304 # stainless steel plate is used, which has the advantages of acid resistance, corrosion resistance, and easy cleaning.

2. Outer box material: Cold rolled steel plate with baked paint treatment.

3. Door handle: Adopting non reactive, explosion-proof door handle, easy to operate, safe and reliable.

4. Insulation system: The insulation area is filled with ultra-fine glass fiber, and the connection between the inner and outer boxes is made of non-metallic high and low temperature resistant materials, effectively reducing temperature conduction; The sealing of the box door is made of refined silicone rubber, so that there is no aging or hardening phenomenon under high and low temperature conditions, and the sealing performance is more reliable; The humidification method adopts isolated humidification.

5. Mobile and positioning device: High quality fixed PU movable wheels are installed at the bottom of the machine, which can easily move the machine to the designated position and then fix the casters.

6. Sample rack: Made of SUS304 # stainless steel punched and bent into a mesh shape, easy to use, adjustable spacing between material racks, standard configuration of two pieces, samples evenly distributed according to a load capacity of 25kg.

7. Test hole: Open a test hole with a diameter of 50mm and attach corresponding insulation fittings and specialized sealing plugs

8. Observation window: Double layer vacuum strengthened glass is used, and the inner laminated conductive film is heated and defrosted to clearly observe the test process.

Test standard:

1、GB2423.1-2008/IEC6008-2-1-2007

2、GB/T 2423.2-2008

3、GJB150.3A－2009

4、GJB150.4A－2009

5、GB2423.22-2008

6、GBT 2424.5-2006

7、GB/T 10589-2008

8、GB/T2423.3-2008(IEC68-2-3)