- Phone
-
Address
Room A851, 1st Floor, No. 7 Xiaoyue Road, Baoshan District, Shanghai
Product Categories
Shanghai Xushuo Electronic Technology Co., Ltd
Programmable DC power supply
NegotiableUpdate on 05/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The programmable DC power supply can directly read the effective voltage, effective current, frequency, active power, and power factor from the panel without the need for an external power meter.
Product Details
Programmable DC power supply
Main functions:
Adopting linear amplification technology, low noise, high stability
High power density design, 1500VA in 3U size, saving installation space
Adjustable frequency, range: 45Hz-500Hz
Phase angle adjustable, range: 0-360 °
High current peak factor, suitable for surge current testing
TRIAC Dimmer dimming/speed controller simulation function
Synchronized TTL signal for output changes
LIST mode for testing power disturbance (PLD) simulation
Can simulate surge and notch waveforms
Voltage sag, short interruption, and voltage variation simulation
Can measure various electrical parameters, including RMS voltage/current, actual power, power factor, VA (visual acuity)
In terms of parameters such as power, peak current, etc
The measurement resolution can reach 0.01W/0.1mA, which meets the requirements of Energy Star standards
Standard configuration: RS-232/USB/LAN (supports SCPI protocol)
Support the connection of 3 devices through System Bus to achieve three-phase AC power supply function
Overcurrent, Overvoltage, Overpower, and Overheating Protection
Programmable DC power supply
By utilizing linear amplification circuit design, low noise and high stability output can be provided. This technology has high-speed response characteristics, stable low noise, can simulate power line abnormalities, instantaneous voltage rises, drops, and power outages, and can be applied to ATE, etc.
Directly reading the voltage effective value, current effective value, frequency, active power, and power factor from the panel, without the need for an external power meter, saves testing costs and complex connection operation time.
