Adidas AC power supply

Aidex AC power supply can achieve three-phase without external accessories. It can be directly connected to three-phase through the SYSTEM BUS interface on the back panel, with one set as the master and the rest as slaves.

Adopting linear amplification technology, low noise, high stability

High power density design, 1500VA in 3U size, saving installation space

Adjustable frequency, range: 45Hz-500Hz

Phase angle adjustable, range: 0-360 °

High current peak factor, suitable for surge current testing

TRIAC Dimmer dimming/speed controller simulation function

Synchronized TTL signal for output changes

LIST mode for testing power disturbance (PLD) simulation

Can simulate surge and notch waveforms

Voltage sag, short interruption, and voltage variation simulation

Can measure various electrical parameters, including RMS voltage/current, actual power, power factor, VA (visual acuity)

In terms of parameters such as power, peak current, etc

The measurement resolution can reach 0.01W/0.1mA, which meets the requirements of Energy Star standards

Standard configuration: RS-232/USB/LAN (supports SCPI protocol)

The IT7300 series can set the starting voltage value, ending voltage value, step voltage value, starting frequency, ending frequency, step frequency, and step time, so that the power supply voltage and frequency can be changed in a stepwise manner. Up to 10 files can be saved. After the test is completed, the voltage, frequency, current, etc. of the power point can be displayed.

Three phases can be achieved without the need for external accessories. They can be directly connected to each other through the SYSTEM BUS interface on the back panel, with one set as the master and the others as slaves.