Pressure relief lubrication pump

Pressure relief lubrication pump/Model of electric lubrication pump;H09263

Pressure relief lubrication pumpFunctional expertise :
1. The interval and lubrication time can be set by PLC instructions or by Bangpu computer.
2. Bangpu operates at high speed with stable pressure and flow, effectively delivering oil to every lubrication point.
3. Equipped with oil level detection and pressure detection, it can timely detect oil level and abnormal alarms.
4. Bangpu belongs to high-pressure and depressurization systems, and when combined with a quantitative volumetric distributor, it can effectively achieve timed, pressure controlled, and quantitative lubrication effects.
5. Suitable for various lubricants and high viscosity oils.
6. Overcome the blind spot of multi-point lubrication in large machinery

2.Sulfuric fluoride detector Sulfuric fluoride tester Model:H09260
Introduction
H09260The sulfuryl fluoride analyzer used for residual determination of fumigation gases can directly read data; The sulfuryl fluoride analyzer has been modified to achieve dual use of battery and AC power supply. Can conduct field analysis of sulfuryl fluoride. H09260The sulfuryl fluoride detector converts sulfuryl fluoride into sulfur dioxide through a built-in pump and pyrolysis device. After processing, the sample concentration can be directly expressed through a sensor with an accuracy of 0.0001%. The sensor for cash isH09260The most important component of the sulfuryl fluoride detector,H09260The circuit includes zero compensation, induction deviation, amplifier, power regulation, pump, pyrolysis device, and display Equipment and power supply. The furnace temperature can reach 1000 ℃. Even at this temperature, the conversion efficiency is still low, so it is important to maintain a constant flow rate and temperature. The pump adopts a double-layer diaphragm high flow rate type, which is adjustable and conducive to stable flow rate. The heating furnace is mainly controlled by chromium thermocouples, and the oscillator is turned on when the required voltage is reached. Can be connected to L.E.D. batteries. Sustainable heating for 10 minutes, and the heating status can be displayed on the panel.

characteristic
During operation, the sample gas enters the sensor and the gas concentration is directly displayed in ppm
The basic components of the instrument are: electromagnetic heater and circuit.
The circuit includes: zero point compensation, sensor bias, amplifier, sampling pump, and display
•H09260The sulfuryl fluoride fumigation gas analyzer is designed specifically for quarantine departments
• Mainly used for detecting residual sulfuryl fluoride after fumigation
The instrument responds quickly, with accurate and reliable results
The detection of spatial concentration is an important means to ensure the success of fumigation treatment and prevent accidental poisoning incidents from occurring
It mainly includes two aspects: detection of spatial fumigant gas concentration during fumigation and detection of fumigation environment concentration after fumigation dispersion
The former is a concentration detection of fumigant gas conducted to understand the leakage of fumigant gas and ensure successful fumigation, which belongs to high concentration detection
The thermal conductivity fumigation gas detector has been widely used for detecting the concentration of fumigant gases in plant quarantine fumigation treatment
This type of instrument is mainly used to determine the gas concentration of fumigants such as Australian methane and sulfuryl fluoride
But it cannot detect the concentration of phosphine gas, nor can it detect the gas concentration of each individual component of mixed fumigants
Unless the adsorption rate of each component of the mixed fumigant is the same for the goods
Environmental concentration detection belongs to low concentration detection, which aims to determine whether the concentration of fumigant gas in the working environment has fallen below the safety threshold concentration
The sulfuryl fluoride fumigation gas detector is a specialized instrument used for detecting residual sulfuryl fluoride in fumigation gases for this purpose

Technical specifications
• Range: 0-50 ppm
• Minimum detectable amount: 1ppm
• Accuracy: ± 1ppm
• Response time: 3 seconds
• Rise time: 120 seconds to 90% of the final value
• Descent time: 30 seconds to 10% of the original value
• Pump: Built in pump
• Power supply: 80-240VAC or 24VDC/5A
• Volume: 216mm * 178mm * 324mm
• Weight: 3.9 KG
• Power on preheating time: 10 minutes
• Measurement time: 40 to 50 minutes (depending on the size of the measurement location)
• Total running time: 1 hour

power supply
220V AC power supply
• Battery pack

3. Model of volatile oil analyzer;H09257
The reflux tube is located above the highest scale mark and is suitable for measuring the content of volatile oils with a specific gravity of 1.0 or higher.
This device is composed of the following accessories:
1. Distillation receiving tube: The reading range of the scale is 0-5ml, and the minimum division value is 0.1ml, with a discharge piston.
2. Reflux condenser tube: plug-in outer diameter 18-20mm, effective length 110mm

4. Oil free air compressor Air compressor model: H09253
working voltage motor power Motor speed noise
220VAC+10% 50HZ 1.2KW 1400R/min <=62DB
displacement Maximum work pressure Working environment temperature Overall dimensions
210L/min 0.7MPa 5-40°C 600X320X780mm
Oil free, pure
small vibration
low noise
Non pulsating air output
Safe and reliable operation, long working life

5. Gel time tester/gel time tester Model: H09252
H09252 gel time tester is used to measure the gel time of chemical products such as macromolecular compounds, resin based plastics, sealants, viscoses, grease agents, synthetic rubber, etc.
Technical constant of H09252 gel time tester
Shell size (mm) 4.7 (119) x 2.7 (69) x 3.7 (94)
H09252 timer: 999.9 minutes
Reciprocal amplitude (mm) 13
Time accuracy ± 2%
electricity 120V/6OHz or 230V/5OHz
weight 0.9kg

The above parameter information corresponds to the image