- Phone
-
Address
B-707, Zhiyuan Building, No. 89 Industrial Road, Shenzhen Bay Community, Shekou Street, Nanshan District, Shenzhen, China
Product Categories
Shenzhen Xinlang Electronic Technology Co., Ltd
Power supply PBZ40-10
NegotiableUpdate on 05/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The PBZ40-10 power supply is a bipolar DC regulated power supply that has no positive or negative polarity switching at the output terminal, and continuously passes through the 0 point with bidirectional variable positive and negative poles. By operating in four quadrants, it is possible to provide power (source) and absorb power (sink), which can drive both inductive and capacitive loads.
Product Details
The PBZ series power supply PBZ40-10 is a bipolar DC regulated power supply that has no positive or negative polarity switching at the output terminal, and continuously passes through the 0 point with bidirectional variable positive and negative poles. By operating in four quadrants, it is possible to provide power (source) and absorb power (sink), which can drive both inductive and capacitive loads. At the same time, it also has a built-in function signal generator that can freely generate any waveform and set timing control. It also has the necessary synchronous operation function and parallel operation function for expanding output current required for power variation testing. The use of "switch mode" and "linear amplifier mode" not only achieves a 40% reduction in weight (about 22kg) compared to our company's previous similar products, but also achieves low ripple, low noise, and high-speed response (100kHz Cv mode).
Waveform generation function: built-in function signal generator! You can easily use any waveform to program!
PBZ series, based on sine wave, square wave, and triangular wave, has 16 built-in waveform elements.
Therefore, amplitude, frequency, initial phase, sweep frequency, and square wave duty cycle can be set.
It is easy to edit, save, and call any of the 16 built-in waveform elements.
Moreover, the timing function (refer to page 4) can set 16 programs for each waveform from 1 step to 1024 steps.
Waveform editing requires specialized software Wavy for PBZ.
