Power plant self-cleaning air purification filter DH320 * 1000mm

Power plant self-cleaning air purification filter DH320 * 1000mm; #215; 1000mm， It is an efficient self-cleaning air filter cartridge designed specifically for power plant boilers, gas turbines, and air compressor intake systems. It has a diameter of 320mm and a height of 1000mm. It uses composite filter materials and PTFE film, and has high dust holding capacity, low resistance, pulse resistance, and long service life characteristics. It is suitable for high dust, high flow, and continuous operation conditions in power plants, providing clean intake guarantee for power equipment.

Self cleaning air purification filter DH320 × 1000mm for power plantsAtmospheric volume, high dust, 24-hour continuous operation, low maintenanceStrict requirement development and integrationEfficient filtration, large dust holding capacity, low operating resistance, strong self-cleaning ability, durable structure, safe adaptationThe six core advantages are widely used in air purification systems for key equipment such as boiler blowers, gas turbine intakes, air compressors, and induced draft fans in thermal power plants. They are the core filtering elements that ensure stable, efficient, and long-term operation of power equipment in power plants.

Efficient and stable filtering performance, usingImported gradient composite fiber+PTFE membrane filter materialThe filtration accuracy can reach 0.3-2 μ m, and the interception efficiency of fine particles such as fly ash, coal dust, sand, water mist, and oil fume in the power plant environment is ≥ 99.9%. It can effectively purify the intake air, prevent dust from entering the interior of boilers, gas turbines, air compressors and other equipment, causing wear, scaling, corrosion of heating surfaces, as well as blade erosion, bearing wear, efficiency decline and other problems, significantly extending the equipment overhaul cycle and reducing operation and maintenance costs.DH320 × 1000mm large-sized deep pleated structureThe single filter area reaches14–16㎡Compared to the conventional 320 × 900 filter cartridge, it has an increase of about 20%, a larger pollutant holding capacity, and a gentle increase in pressure difference,The service life can reach 8000-12000 hours under high dust conditions in power plantsReduce the frequency of shutdown and replacement to ensure the continuous and stable operation of the unit.

Low resistance design, significant energy saving and consumption reduction, filter material usedGradient pore structure+PTFE coatingThe surface is smooth and breathable, with an initial resistance of only150–200PaIt is much lower than ordinary filter cartridges, and the resistance increases slowly in high dust holding conditions, effectively reducing the energy consumption of the supply fan and induced draft fan operation, and helping power plants achieve energy-saving, consumption reducing, and low-carbon operation goals. Meanwhile, the membrane filter materialWaterproof, oil resistant, and moisture resistantIt can adapt to the rainy season and high water mist environment of power plants, and the filter material is not easily affected by moisture and blockage, always maintaining stable low resistance filtration performance.

Strong self-cleaning and regeneration ability, suitable for pulse cleaning system, filter cartridge adoptsHigh strength polyester fiber substrate+PTFE coatingThe surface is non stick to dust and easy to clean0.4-0.6MPa pulse blowback pressureBelow, the dust stripping rate is ≥ 98%, with excellent dust cleaning and regeneration performance. It can be used repeatedly for a long time without frequent disassembly, cleaning or replacement, greatly reducing maintenance labor and spare parts costs. filter cartridgeBuilt in thickened galvanized steel plate skeletonThe upper and lower end covers are made ofHigh strength anti-corrosion steel plate/flame-retardant plastic, MatchingHigh temperature and oil resistant sealantThe overall structure is sturdy and durable, resistant to deformation, vibration, and high-voltage pulse impact. It can withstand long-term vibration and pulse blowback conditions of power plant equipment,No delamination, no collapse, no damageStructural stability.

Wide safety adaptability, easy installation and maintenance,Standard DH320mm diameter, 1000mm heightThe chuck/lifting installation structure is suitable for mainstream self-cleaning air dust collectors and intake purification equipment in power plants, and can directly replace imported or domestic filter cartridges of the same specifications without the need for equipment modification, making disassembly and assembly quick and effortless.End cap equipped with aging resistant nitrile rubber sealing ringSealed tightly without air leakage, preventing the bypass of dusty air and ensuring the filtration efficiency of the system. filter cartridgeTemperature resistance -30 ℃~+85 ℃It can adapt to the harsh environment of high temperature, humidity, and dust in power plant buildings, and the filter material will not age, pulverize, or deteriorate in performance after long-term use. This filter cartridgeHigh filtration efficiency, large sewage capacity, low operating resistance, strong self-cleaning ability, sturdy and durable, high cost-effectivenessWith its comprehensive advantages, it safeguards the clean intake of power equipment in power plants, helps power plants achieve safe, efficient, energy-saving, and long-term stable operation, and is the ideal preferred filter cartridge for self-cleaning air purification systems in power plants.