Portable UV machine, power supply 220V, manual UV curing

Portable UV machinePower supply 220V, manual UV curing.

. Precautions

1. Ensure that the equipment is properly ventilated and operated in a normal environment

2. It is strictly prohibited to directly gaze into the cavity from the inlet or outlet to prevent damage to the human body caused by ultraviolet light

If the lights are not turned on for a long time after the power is turned on, the device will automatically cut off the system power

4. For systems with multiple UV lamps, it is not allowed to start multiple UV lamps at the same time, otherwise it will cause the air switch to overload and trip; Be sure to start one by one and wait until the current of one lamp stabilizes before starting the other

5. After turning off the UV lamp, immediately restart it. If the UV lamp does not light up, it is a normal phenomenon. Wait for the UV lamp to cool down before turning it back on

To prevent abnormal or premature aging of UV lamps, the main power supply cannot be immediately cut off after the lamp is lit, and the machine must wait for automatic shutdown

The luminous intensity of UV lamps will decay over time, so users should regularly replace the lamps according to their actual usage

When the fan is abnormal or stopped, do not continue to use the equipment to avoid burning the ultraviolet lamp and reflector

9. If there is a serious malfunction of the equipment, the relevant person in charge of our company must be notified in a timely manner, and subjective mandatory maintenance or modification is not allowed

Tengjie Machinery