- Phone
-
Address
No. 33, Cangzhou West Development Zone
Product Categories
Cangzhou Luyi Testing Instrument Co., Ltd
Polishing tester DM-III
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The polishing tester DM-III is a device used to evaluate the poor polishing performance of primer and putty. This device performs back and forth polishing on the primer and putty samples to be tested, and the polishing frequency can be directly read by a counter. Based on the load weight, polishing frequency, and wear degree, the polishing resistance of the primer and putty can be evaluated. This instrument uses magnetic suction cups, making sample loading and unloading convenient.
Product Details
Polishing tester DM-III
It is a device used to evaluate the poor polishing performance of primer and putty. This device performs back and forth polishing on the primer and putty samples to be tested, and the polishing frequency can be directly read by a counter. Based on the load weight, polishing frequency, and wear degree, the polishing resistance of the primer and putty can be evaluated. This instrument uses magnetic suction cups, making sample loading and unloading convenient.
2、 Main parameters:
1. Friction speed: 0-135 times/minute (one-way)
2. Travel distance: 155mm
3. Number range: 0-9999 (two-way counting) Note: two-way x 2 is one-way
4. Load: Grinding head: 570 ± 15 grams Counterweight blocks: 50 ± 3 grams, 100 ± 4 grams, 200 ± 7 grams, 1 each
5. Power supply: 220V 50Hz
6. Power: 60W
7. Dimensions: 300 × 280 × 380 (length × width × height) Weight: Approximately 25kg
8. Sample specification: Tinplate 50 × 120 δ=0.3~1.5mm
Polishing tester DM-III
It is a device used to evaluate the poor polishing performance of primer and putty. This device performs back and forth polishing on the primer and putty samples to be tested, and the polishing frequency can be directly read by a counter. Based on the load weight, polishing frequency, and wear degree, the polishing resistance of the primer and putty can be evaluated. This instrument uses magnetic suction cups, making sample loading and unloading convenient.
2、 Main parameters:
1. Friction speed: 0-135 times/minute (one-way)
2. Travel distance: 155mm
3. Number range: 0-9999 (two-way counting) Note: two-way x 2 is one-way
4. Load: Grinding head: 570 ± 15 grams Counterweight blocks: 50 ± 3 grams, 100 ± 4 grams, 200 ± 7 grams, 1 each
5. Power supply: 220V 50Hz
6. Power: 60W
7. Dimensions: 300 × 280 × 380 (length × width × height) Weight: Approximately 25kg
8. Sample specification: Tinplate 50 × 120 δ=0.3~1.5mm
