- Phone
-
Address
Building 1, No. 16 Xingwu Road, Wuzhong Economic Development Zone, Suzhou City
Product Categories
- Coal mine cable bending testing machine
- Pneumatic punching machine (wire and cable insulation sheath)
- Polyethylene environmental stress cracking tester
- Wire and cable solderability testing machine
- Electric curtain rail angle bending machine
- Rubber plastic pneumatic slicer
- Thermal stability testing machine
- Six sets of swing testing machines
- aging test chamber
- Fire resistance testing machine for wires and cables
- Electric constant temperature water bath
Suzhou Kaitel Instrument Equipment Co., Ltd
Pneumatic punching machine (wire and cable insulation sheath)
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
K-QP3 Pneumatic Punching Machine (Insulation and Sheath of Wires and Cables) is commonly used to cut insulation and sheath materials of rubber, plastic, and wires and cables into standard shaped test pieces for testing purposes. When cutting test pieces, according to customer needs, configure cutting dies according to GB/T529-2008, GB/T528-2009, GB/T2951.11-2008 standards to cut rubber standard test pieces for aging, thermal extension, tensile testing, and tear strength testing.
Product Details
K-QP3Pneumatic punching machine (wire and cable insulation sheath)
1、 Product Introduction
Pneumatic punching machine (wire and cable insulation sheath)Commonly used to cut insulation and sheath materials of rubber, plastic, wires and cables into standard shaped test pieces for testing purposes.
Pneumatic punching machine (wire and cable insulation sheath)When cutting test pieces, configure according to customer needsGB/T529-2008, GB/T528-2009，GB/T2951.11-2008A standard cutting die is used to cut rubber standard test pieces for aging, thermal extension, tensile testing, and tear strength testing.
2、 Main technical parameters
1Production thickness0.8～2.0mmDumbbell test piece
2Impact travel:110mm；
3Gas source pressure:0.8MPa；
4Impact force: about1.5T；
5Sample table:140mm×300mm；
6National standard dumbbell knife mold:50mm×8.5mm×4mmThe75mm×12.5mm×4mm；
7Dumbbell knife molds can be customized.
Similar Product Recommend
