Pneumatic internal thread ball valve

Q611F-16PPneumatic internal thread ball valveIntroduction
Internal threaded pneumatic ball valves are divided into integral, two-piece, and three piece types. The valve body casting adopts the * process introduced from Taiwan, China, China, with reasonable structure and beautiful appearance. The valve seat adopts an elastic sealing structure, which is reliable in sealing and easy to open and close. The internal thread pneumatic ball valve stem adopts a bottom mounted structure with reverse sealing, and the stem will not be impacted when the valve chamber is abnormally pressurized. A 90 ° switch positioning mechanism can be set, and locks can be added as needed to prevent accidental operation. Internal threaded pneumatic ball valves and pneumatic welded ball valves are suitable for various pipelines with PN ranging from 1.0 to 4.0 MPa and working temperatures of -29 to 180 ℃ (with reinforced polytetrafluoroethylene sealing ring) or -29 to 300 ℃ (with polystyrene sealing ring). They are used to cut off or connect media in pipelines. Different materials are selected and can be applied to various media such as water, steam, and oil.

Q611F-16PPneumatic internal thread ball valveSelection characteristics

(1) Valve body parameters: nominal diameter, working pressure, process medium, usage scenario, valve body material, and other series of parameters.

(2) Actuator parameters: actuator form, control mode, control signal (4-20mA, 1-5V), action mode (air open, air closed)

Please provide detailed technical parameters of the internal thread pneumatic ball valve as much as possible to facilitate our company's operation and technical personnel to accurately select for you. If you have any questions You can call us and we will do our best to provide you with high-quality service!

1. Gear type dual piston, with large output torque and small volume.

2. The cylinder is made of aluminum material, which is lightweight and aesthetically pleasing.

3. Manual operating mechanisms can be installed at the top and bottom.

4. The rack and pinion connection can adjust the opening angle and rated flow rate.

5. The actuator can be equipped with live signal feedback indicators and accessories to achieve automated operation.

6. The IS05211 standard connection provides convenience for the installation and replacement of products.

7. The adjustable screws at both ends provide a ± 4 ° adjustable range for standard products between 0 ° and 90 °. Ensure synchronization accuracy with internal threaded pneumatic ball valves.