- Phone
-
Address
Building 1, No. 16 Xingwu Road, Wuzhong Economic Development Zone, Suzhou City
Product Categories
- Coal mine cable bending testing machine
- Pneumatic punching machine (wire and cable insulation sheath)
- Polyethylene environmental stress cracking tester
- Wire and cable solderability testing machine
- Electric curtain rail angle bending machine
- Rubber plastic pneumatic slicer
- Thermal stability testing machine
- Six sets of swing testing machines
- aging test chamber
- Fire resistance testing machine for wires and cables
- Electric constant temperature water bath
Suzhou Kaitel Instrument Equipment Co., Ltd
Plug wire six group swing testing machine
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The K-LYB2099 six group swing testing machine for plug wires can also be called a wire bending testing machine. This testing machine complies with the provisions of relevant standards such as GB2099, UL817, VDE, etc. regarding the general safety requirements for flexible wire components and power cords. Suitable for manufacturers and quality inspection departments to conduct bending tests on power cords and DC cords.
Product Details
Plug wire six group swing testing machine
This machine is specifically designed to test the flexural strength of DC cables, headphone cables, USB cables, plug leads, and wires. The method is to fix the sample on a fixture and apply a certain load. During the test, the fixture swings left and right, and after a certain number of times, the breakage rate is checked; Or when it cannot be powered on, check the total number of swings. This machine can automatically count and stop the operation when the sample is bent until it breaks and cannot be powered on.
Six sets of swing testing machines
Comply with the provisions of relevant standards such as GB2099, UL817, VDE, etc. regarding the general safety requirements for flexible cord components and power cords.
Suitable for manufacturers and quality inspection departments to conduct bending tests on power cords and DC cords.
Six sets of swing testing machinesTechnical specifications
1. Fixtures: 6 sets (6 plug lead tests can be conducted simultaneously each time)
2. Swing angle: adjustable from 10 ° to 180 ° back and forth
3. Swing speed: 10~60 times/min adjustable
4. Automatic counters: 6, each independently counting
5. Load capacity: six pieces each of 50g, 100g, 200g, 300g, 500g, for a total of 30 pieces.
6. Dimensions (approximately): 85 × 60 × 75cm
7. Working power supply: AC 220V/50Hz
8. Weight approximately: 100KG
Similar Product Recommend
