Plastic tensile creep testing machine

Main purpose:

FLECPlastic tensile creep testing machineMainly used for testing the mechanical properties of specimens such as batteries, composite materials, rubber plastics, etc. under high and low temperature environments, including creep, stress-strain, and high-temperature stress relaxation. This machine can be configured with three or four workstations as needed6Multiple workstation specifications such as workstation and multi workstation, multiple samples at once, have improved testing efficiency. The experimental temperature can be selected from low to high according to the testing needs.

Meet the standards:

Plastic tensile creep testing machinesatisfyGBT 2039-2012Uniaxial tensile creep test method for metallic materialsHB5151High temperature tensile creep test method for metalsGBT 16825.1Calibration of tensile and pressure testing machineGBT 10120Standard method for stress relaxation test of metallic materialsE 328Stress relaxation test standardsGBT 7759Vulcanized rubber and thermoplastic rubber are compressed at room temperature, high temperature, and low temperatureVarious domestic and international creep relaxation test standards, such as deformation measurement standards, are required.

Main technical parameters:

Model:FLEC304-3ZTheFLEC504-3ZTheFLEC105-3Z

1Rated load test force:30KNThe50KNThe100KNThe200KNOptional;

2Sample quantity workstation:3Workstation4Workstation6Workstation12Optional workstations;

3Accuracy of force measurement: ±0.5%FS；

4Measurement range:0.4%～100%F.S；

5Experimental power resolution:50Ten thousand yards, no grading throughout the entire process, and the resolution remains unchanged throughout the entire process;

6Displacement resolution:0.04Mm；

7Deformation measurement range:0.2%～100%FS(Full range);

8Deformation indication error: ± of indication value0.5%Within;

9Deformation resolution:50Ten thousand yards, no grading throughout the entire process, with unchanged resolution throughout the entire process;

10Range of stress control rate:0.005～5%FS/s；

11Strain control rate range:0.005～5%FS/s；

12Displacement control rate accuracy: ± of the set value0.5%Within;

13Adjustment of Test Speed Range for Creep Testing Machine:0.05~100mm/min;

14Test temperature range:-70~300℃、-40~200℃, room temperature~450℃ and other optional parameters;

15Stretch creep fixtures, compression creep test fixtures, etc. can be customized according to the sample;

16The high rigidity frame, sturdy and durable, precise ball screw, thick guiding light bar, and precise servo drive system provide reliable, repeatable, and highly accurate testing guarantees for the testing machine;

17The testing machine has better centering accuracy. When conducting axial tests, a system with stable and accurate rigid guide columns can obtain precise stress and strain results;

18The testing machine has three closed-loop control functions such as stress, strain, and displacement. During the testing process, various control modes can be automatically switched without impact, and complex programming tests can be conducted.