- Phone
-
Address
Room 1503, Jiayuan Business Building, 2222 Huancheng Road, Jiading District, Shanghai
Shanghai Yiou Instrument Equipment Co., Ltd
Room 1503, Jiayuan Business Building, 2222 Huancheng Road, Jiading District, Shanghai
YIOU brandDP7000APitot tube anemometer
1、 Overview
YIOU brandDP7000AseriesPitot tube anemometerMake youThe pressure test for HVAC is simple. The instrument can use a pitot tube to measure the wind speed, pressure, and volume inside the duct,wind-warm syndromeAnd environmental humidity.DP7000AThe operation is simple and can accurately measure differential pressure and static pressure.DP7000AIt can also calculate air volume and has automatic data recording function.The pressure resolution has reached0.01Pa. The air volume resolution reaches 0.01m3/h. Wind speed resolution: 0.01m/s
2、 Advantages and features
1. Adopting a 4.6-inch color touch screen.
2.Pressure, differential pressure, wind speed, air volume, temperature, humidity,Dynamic pressure,Full pressure and static pressure.
3.Data statistics function calculationMaximum value, minimum value, average value, data retention lock function, reset function. Switch between Chinese and English.
4. Recordable storage 20000 pensdata.Historical data can be queried, average sampling time can be set, upper and lower limit alarm points can be set, density table can be queried on the instrument, start recording, stop recording, and historical recording can be set,Record data with time and date markings.
5.programmablePitot tubeK coefficientMeasurement point cross-sectional area0.00001~1000m2Any settingDensity of the medium.
6.connectableK-type thermocouple (Optional) Probe length can be customized
7.Wind speed probe can withstand temperature for a long time550 degrees, with an interval of 1000 degrees.
threeTechnical parameters:
model |
Pressure range |
resolution |
wind speedrange |
DP7000A-1 |
0~±500.00Pa |
0.01Pa |
1.00~30.00m/s |
DP7000A-2 |
0~±1000.00Pa |
0.01Pa |
1.00~40.00m/s |
DP7000A-3 |
0~±2000.00Pa |
0.01Pa |
1.00~50.00m/s |
DP7000A-4 |
0~±3000.00Pa |
0.01Pa |
1.00~70.00m/s |
DP7000A-5 |
0~±5000.00Pa |
0.01Pa |
1.00~90.00m/s |
DP7000A-6 |
0~±6000.00Pa |
0.01Pa |
1.00~100.00m/s |
DP7000A-7 |
0~±8000.00Pa |
0.01Pa |
1.00~115.00m/s |
DP7000A-8 |
0~±20.00kPa |
0.01Pa |
1.00~180.00m/s |
DP7000A-9 |
0~±30.00kPa |
0.01Pa |
1.00~220.00m/s |
DP7000A-10 |
0~±50.00kPa |
0.01Pa |
1.00~288.00m/s |
DP7000A-11 |
0~±60.00kPa |
0.01kPa |
1.00~300.00m/s |
DP7000A-12 |
0~±100.00kPa |
0.01Pa |
1.00~400.00m/s |
DP7000A-13 |
0~±130.00kPa |
0.01Pa |
1.00~465.00m/s |
DP7000A(Water measurement) |
0~±8000.00Pa |
0.01Pa |
0.00~4.00m/s |
DP7000A(Water measurement) |
0~±100.00kPa |
0.01Pa |
0.00~15.00m/s |
Wind speed accuracy |
±2. 5% reading |
||
Wind speed resolution |
0.01m/s |
||
Pressure accuracy level |
±0.5%FS can be customized with 0.1% FS |
||
air volume range |
0~99999999m3/h |
||
Air volume resolution |
0.01m3/h |
||
Built in temperature |
-20℃~60℃ |
||
temperature accuracy |
±1℃Resolution: 0.1℃ |
||
External temperature |
-20℃~600℃(Optional) Note: Probe length can be customized |
||
Built in humidity |
0-100%RH |
||
Humidity accuracy |
± 3% resolution 0.1% RH |
||
Duct size |
1-700CM |
||
volumetric flow rate |
Actual wind speed, pressure, actual duct area, andK-coefficient function |
||
data storage |
20000 data sets |
||
sampling interval |
1s~1h |
||
battery |
Lithium battery220V adapter,continuous work8 hours |
||
unit |
Pa,kPa,Mpa,bar,psi,mmH2O,mmHg,m/s,ft/s,m3/h,m3/s,m3/m, l/h, l/m, l/s,℃,℉,RH% |
||
Instrument appearance dimensions |
long190 x width 112 x height 52mm (excluding protruding parts) |
||
weight |
Instrument weight: approximately550g, Weight including suitcase and accessories: approximately 1800g |
||
standard configuration |
One host,L-shapedOne pitot tube, one instruction manual, combinedgridOne copy of warranty card and hose2 packs (1 meter each), one adapter, external temperature probe(Including handle310mm, Probe length 180mm),One aluminum alloy box |
||
Optional parts |
RS485 communication, RS232 interface |
||