Pilz PILZ relay PNOZ m ES 14DO in stock original

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Pilz PILZ relay PNOZ m ES 14DO in stock original product introduction: Product material number: 772181 $r $n Configurable small safety controller PNOZmulti 2, expansion module, 14 semiconductor outputs for standard applications.

Product Details

Pilz PILZ relay PNOZ m ES 14DO in stock originalProduct Details

Pilz PILZ relay PNOZ m ES 14DO in stock original

PNOZ m ES 14DO

Product Material Number: 772181

Configurable small safety controller PNOZmulti 2, expansion module, 14 semiconductor outputs for standard applications.

Technical data

Electrical data

The purpose of U2	SC output power supply
Supply voltage 2 (V)	24 V
Power supply voltage type U2	DC
U2's tolerance
Potential isolation U2	Yes, it is
The purpose of UINT1	Module power supply
Internal voltage source	Through basic modules
Voltage type of UINT1	DC
Allowable load	Resistive type Inductive type Capacitive type

Semiconductor output

Potential isolation between semiconductor outputs	Yes, it is
Semiconductor output short circuit protection	Yes, it is
SC output: DC, compliant with UL standards	24 VDC P. D.

environmental data

Environmental temperature standard	EN 60068-2-14
Environmental temperature expressed in degrees Celsius	0 - 60 °C
Storage temperature standard	EN 60068-2-1/-2
Climate suitability standards	EN 60068-2-30 EN 60068-2-78
Allow/Do not allow condensation	Not allowed
The maximum installation height above sea level is not limited by the rated power	2000 m
EMC meets the standard ..	EN 61131-2
The standards on which vibration testing is based	EN 60068-2-6
The acceleration specified in Standard 1 is the basis for impact stress testing	15 g
Standards for gap and creepage distance to be followed	EN 61131-2
Overvoltage level	Two
Specification for gap and creepage distance pollution level	2
Protection level standard	EN 60529
Protection type, installation
Protection type, casing
Terminal protection type

Potential Separation

Potential isolation between circuit components 1	SC output and system voltage
Potential isolation type 1	Basic insulation

Mechanical data

Installation location	Horizontally located on the top hat guide rail
DIN power rail dimensions (EN 50022)	35 x 7.5 EN 50022
Lower part of shell material	PC
Front panel of shell material	PC
The material of the upper part of the shell	PC
terminal	Screw end Spring loaded terminal
Terminal style	Pluggable
Allowable cross-sectional area of flexible AWG conductor	24 - 12 AWG
height dimension	101.4 mm
width dimension	22.5 mm
depth dimension	120 mm
Net weight	100 g
Total weight	110 g