- Phone
-
Address
No. 182 Anbian Road, Putuo District, Shanghai
Product Categories
Shanghai Yibo Electromechanical Equipment Co., Ltd
German original Pilz PILZ relay 772100 in stock
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
German original Pilz PILZ relay 772100 spot product introduction: configurable small safety controller PNOZmulti 2, basic unit, expandable, 20 safety digital inputs, 4 safety semiconductor outputs.
Product Details
German original Pilz PILZ relay 772100 in stockProduct Details
German original Pilz PILZ relay 772100 in stock
Technical data
Electrical data
| The purpose of U1 | System power supply |
| Supply voltage (V) | 24 V |
| Power supply voltage type U1 | DC |
| The purpose of U2 | SC output power supply |
| Supply voltage 2 (V) | 24 V |
| Power supply voltage type U2 | DC |
| U2's tolerance | |
| Potential isolation U2 | Yes, it is |
| Allowable load | Resistive type Inductive type Capacitive type |
Configurable input/output
| The number of configurable I/O | 8 |
| Configurable I/O potential isolation | No, no |
| Short circuit protection for non safety related semiconductor outputs | Yes, it is |
| Under the '1' signal, there is a voltage present on the non safety related semiconductor output | UB -2 V at 0.1 A |
input
| Number of digital inputs | 12 |
| U input complies with EN 61131-2 type 1 | 24 V DC |
| Potential isolation between input and internal module bus voltage | No, no |
Semiconductor output
| Potential isolation between semiconductor outputs | Yes, it is |
| Semiconductor output short circuit protection | Yes, it is |
Test clock output
| Test the number of pulse outputs | 4 |
environmental data
| Environmental temperature standard | EN 60068-2-14 |
| Environmental temperature expressed in degrees Celsius | 0 - 60 °C |
| Storage temperature standard | EN 60068-2-1/-2 |
| Climate suitability standards | EN 60068-2-30 EN 60068-2-78 |
| Allow/Do not allow condensation | Not allowed |
| The maximum installation height above sea level is not limited by the rated power | 2000 m |
| EMC meets the standard .. | EN 61131-2 |
| The standards on which vibration testing is based | EN 60068-2-6 |
| The acceleration specified in Standard 1 is the basis for impact stress testing | 15 g |
| Standards for gap and creepage distance to be followed | EN 61131-2 |
| Overvoltage level | Two |
| Specification for gap and creepage distance pollution level | 2 |
| Protection level standard | EN 60529 |
| Protection type, installation | |
| Protection type, casing | |
| Terminal protection type |
Potential Separation
| Potential isolation between circuit components 1 | SC output and system voltage |
| Potential isolation type 1 | Basic insulation |
Mechanical data
| Installation location | Horizontally located on the top hat guide rail |
| DIN power rail dimensions (EN 50022) | 35 x 7.5 EN 50022 |
| Lower part of shell material | PC |
| Front panel of shell material | PC |
| The material of the upper part of the shell | PC |
| terminal | Spring loaded terminal Screw terminal |
| Terminal style | Pluggable |
| Allowable cross-sectional area of flexible AWG conductor | 24 - 12 AWG |
| height dimension | 101.4 mm |
| width dimension | 45 mm |
| depth dimension | 120 mm |
| Net weight | 235 g |
| Total weight | 250 g |
Similar Product Recommend
