- Phone
-
Address
No. 182 Anbian Road, Putuo District, Shanghai
Product Categories
Shanghai Yibo Electromechanical Equipment Co., Ltd
Pilz PILZ relay PNOZ m B1 in stock original
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Pilz PILZ relay PNOZ m B1 in stock original product introduction: configurable small safety controller PNOZmulti 2, basic unit, expandable, Ethernet interface for connecting switches, USB 20 memory.
Product Details
Pilz PILZ relay PNOZ m B1 in stock originalProduct Details
Pilz PILZ relay PNOZ m B1 in stock original
Technical data
Electrical data
| The purpose of U1 | System power supply |
| Supply voltage (V) | 24 V |
| Power supply voltage type U1 | DC |
| Power consumption DC | 18.5 W |
Test clock output
| Test the number of pulse outputs | 4 |
Ethernet interface
| Ethernet IP address | 169.254.60.1 |
| EtherNet connector type | RJ45 |
| Ethernet transmission rate | 10 MBit/s 100 MBit/s |
CANopen interface
| Number of Ethernet interfaces | 2 |
environmental data
| Environmental temperature standard | EN 60068-2-14 |
| Environmental temperature expressed in degrees Celsius | 0 - 60 °C |
| Storage temperature standard | EN 60068-2-1/-2 |
| Climate suitability standards | EN 60068-2-30 EN 60068-2-78 |
| Humidity rating | 93 % r.h.40 °C |
| Allow/Do not allow condensation | Not allowed |
| The maximum installation height above sea level is not limited by the rated power | 2000 m |
| EMC meets the standard .. | EN 61131-2 |
| The standards on which vibration testing is based | EN 60068-2-6 |
| Standards for gap and creepage distance to be followed | EN 61131-2 |
| Overvoltage level | Two |
| Specification for gap and creepage distance pollution level | 2 |
| Protection level standard | EN 60529 |
| Protection type, installation | |
| Protection type, casing | |
| Terminal protection type |
Mechanical data
| Installation location | Horizontally located on the top hat guide rail |
| DIN power rail dimensions (EN 50022) | 35 x 7.5 EN 50022 |
| Lower part of shell material | PC |
| Front panel of shell material | PC |
| The material of the upper part of the shell | PC |
| terminal | Screw terminal Cage clamp terminal |
| Terminal style | Pluggable |
| Allowable cross-sectional area of flexible AWG conductor | 24 - 12 AWG |
| height dimension | 101.4 mm |
| width dimension | 45 mm |
| depth dimension | 120.2 mm |
| Net weight | 209 g |
| Total weight | 219 g |
Similar Product Recommend
