- Phone
-
Address
Building 13-1, Cuijing Beili, Tongzhou District, Beijing
Product Categories
Dezhong Ruida Process Equipment (Beijing) Co., Ltd. (A VTA Company)
Pilot thin film evaporator
NegotiableUpdate on 07/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Features of VD125 pilot thin film evaporator: n -0.2 square meters of evaporation area, processing capacity of 10-20 kilograms per hour. Compared with short-range distillation, it can better prevent vapor-liquid entrainment and is more suitable for removing light components. n - Made of 316Ti stainless steel with high corrosion resistance. n - Full jacket design, capable of processing high melting point and high viscosity materials. n - Fully continuous operation, high production efficiency, and high automation level
Product Details
| Device name | Pilot scale thin film evaporation device |
| model | VD125-20Fully heated and fully gear pump type |
| Evaporator material | 1.4571（316Ti） |
| Characteristics of evaporator | Evaporator main heating jacket,The recombination separation area is all jacket type |
| Evaporation area | 0.2m² |
| Scope of Material Processing | Melting Point Range180Materials below ℃ |
| Feed quantity | 5-20 kg/h (Depending on the nature of the material) |
| Maximum heating temperature of evaporator | 300℃ Optional highest350℃heating device |
| Minimum operating pressure(When the equipment is unloaded) | 0.1mbar |
| Feed form | Feed gear pump |
| Discharge form | One discharge gear pump for each light and heavy component |
| Inlet and outlet forms of evaporator | flanged |
VD125-20Pilot thin film evaporatorThe land area is long2.5Meter, wide1.5Meter, high2.5There are no specific requirements for the installation space. More importantly, the maintenance of this equipment is very simple, and the rotor can be disassembled without the need for top lifting tools. It is very suitable for situations where frequent operation and maintenance of the equipment are required.
VTAProvide a pry mounted turnkey device, equipment * inVTAAfter assembly and testing in the factory, the equipment will be sent to the customer's site as a whole. The customer only needs to connect the power supply and basic utilities to start production work. Greatly saving installation and debugging time on site.
Continuous operation processing, with an hourly processing capacity of approximately20Kilograms per hour, the amount that can be processed per day will be considerable.It has a good linear ratio for industrial scaling up and can provide important parameters for the selection of industrial equipment.
Due to the adoption ofVTAHigh precision feed and discharge gear pumps allow for direct discharge under high vacuum without the need for any buffer tanks, and can accurately calculate the distillation ratio of light and heavy components.
VTAPilot thin film evaporatorIt can achieve the following main functions:
- Prove the feasibility of using thin film evaporation for thermal separation
- Optimize the process to obtain design data for industrial production systems
- Small scale production and continuous operation can be carried out, with a processing capacity of up to20 kilogram/hour
- Optimize the performance of the evaporator, including determining a suitable scraper rotor
