Pilot flash extractor

working principle

Pilot flash extractorThe principle can be described as: through the clever design of a flash extractor, the material is crushed at high speed to the appropriate particle size in the presence of an appropriate solvent, accompanied by external forces such as high-speed stirring, vibration, and negative pressure filtration, achieving the optimal combination of these three factors and fully improving the extraction efficiency.Pilot flash extractorIt can retain the active ingredients of plants to the maximum extent, without being damaged by heat, with small solvent dosage, short extraction time, high efficiency, wear-resistant cutting tools, compact structure, and safe and reliable use.

Technical Specifications

working environment

Environmental temperature: ≤ 40 ℃

Environmental humidity: ≤ 80%

Power supply voltage: AC380V ± 5%

main part

Speed control: gear button (stop/1st gear/2nd gear/3rd gear)

Display mode: LED digital tube screen display

Lift control: button control (up/stop/down)

Positive and negative rotation control: Two speed knob

Wiring: 13 core integrated control line output

Power motor: speed 1500-6000r/min

Lift motor: speed 60r/min

Crushing blade diameter: 100mm (outer diameter)

Crushing blade material: 0cr18Ni9 (stainless steel)

work standard

Processing capacity: 50 liters/time

Crushing standard: 40-60 mesh

Broken container

Closing round barrel: Φ 400 × 500 high (made of stainless steel material)

Device dimensions

Host: 670mm in length, 500mm in width, and 1720mm in height

Control cabinet: length 380mm x width 350mm x height 860mm

Operation method

It can be operated by a single person. Put the extract into a container, add an appropriate amount of solvent, adjust the position of the blade according to the height of the container and the depth of the solvent, and then turn on the machine. Crushing and extraction can be completed in an instant, and it can be filtered after homogenization.