Micro magnetic high-pressure reactor

NegotiableUpdate on 01/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The miniature magnetic high-pressure reactor is a new model independently developed by our company, commonly used in university laboratories and research institutes as a reaction vessel for synthesis experiments.

Product Details

Micro magnetic high-pressure reactorFunctional configuration and technical parameters

Design volume (effective volume): 25ml, 50ml, 100ml, 200ml, 500ml, 1000ml

Design temperature: 200 ℃ -450 ℃ (optional)

Design pressure: 10MPa/20MPa/30MPa/40MPa/50MPa (optional)

Material of kettle body: 316L stainless steel/titanium/Hastelloy/Monel alloy, etc

Valve and connection material: 316L stainless steel/Hastelloy alloy

Reactor vessel: lined with PTFE inner sleeve/quartz glass inner sleeve. Equipped with temperature controlled heating device and uniform heat transfer design; Equipped with the function of introducing body gas; Equipped with magnetic stirring function; Can perform online detection of gas and liquid phases; Equipped with working temperature and pressure sensors and displays; Equipped with automatic pressure relief protection; Equipped with an online feeding bin under high pressure (this function needs to be optional)

Working temperature: Pure titanium/Hastelloy material up to 350 ℃, stainless steel material up to 250 ℃, temperature display accuracy: ≤± 1 ℃

Mixing power: 25W -100W depending on the model

Heating power: 300W -1000W depending on the model

Heating method: oil bath heating/electric heating wire heating/ceramic furnace heating (optional)

Insulation layer: using aluminum silicate cotton vacuum formed environmentally friendly temperature body

Insulation layer: made of alkali free glass fiber

Insulation coefficient: ≥ 500 MHz when relative humidity ≤ 35%

Working hours: 72 hours of continuous work per session

Micro magnetic high-pressure reactorAccessories: 1 high-pressure hose, 1 sampling tube, 1 cooling bracket, 1 mixer, 1 special wrench, 1 inner lining (optional)