Pig iron element analyzer

Pig iron element analyzerEDX4500 XFluorescence spectrometer is used XRFTechnological solutions for complex components in domestic cement plants and steel companiesmaterialThe Fast of Middle ElementsFast and accurate analysis. The main feature of this technology is the use of low energy X Light excitation of the element under test, for SiTheS、AlTheNaTheMg Waiting for light elements to have a good stimulating effect,And the testing time is short, greatly improving the detection efficiency and work efficiency; adoptFAST-SDD Detector, withThere is a good energy lineSexual and energy resolution, as well as good spectral characteristics, high peak to back ratio; The use of an automatic spectrum stabilization device ensures the smooth operation of the instrumentuniformity; Using spectral decomposition techniques to decompose spectral peaks, usingFAST-SDD The analyzer of the detector SiTheSTheAlMeasurement of light elementsTry to havehigherAccuracy of analysis; Adopting similar automatic classification technology to make classification more accurate and effectiveOvercoming the impact of baseline effects on measurement; Adopting a multi parameter linear regression method to significantly eliminate the absorption and enhancement effects between elements.

Performance characteristics

Professional full element analysis of cement, steel, mineral materials, etc., can also be used for coating detection andRoHS testing.

The built-in signal-to-noise ratio enhancer can effectively improve the signal processing capability of the instrument 25 Twice.

The collimator and filter can be automatically switched for different samples.

Electric refrigeration FAST-SDD Detector, abandon liquid nitrogen refrigeration.

Intelligent full element analysis software complements the instrument hardware and is easy to operate.

Pig iron is the most important intermediate product in the production process of steel enterprises. Its quality directly affects the quality of the final product and also determines the amount of auxiliary materials and energy used before processing into steel billets. general situationBelow, as long as the pig iron is tested In X In fluorescence spectroscopy analysis instruments, for C(Charcoal) YuanSu cannot be tested, so X In fluorescence analysis instruments, generally only SiTheMnThePTheSConduct testing.

The following usesEDX4500 The spectrum and working curve obtained from actual testing of pig ironWaiting for relevant numbersAccording to:

1 Pig iron is available EDX4500 Spectral diagram for testing

From the spectrum, it can be seen that the element to be tested SiTheMnTheP TheS The spectrumVery clear and obvious, such a spectrumThe results of the graph are very powerful for measuring the sample. In addition, for Al TheCrThe spectra of auxiliary elements are also clearClearly visible, it can also be tested.

2 Pig iron -Si of workCreate curves and related data

3 Pig iron -Mn The working curve and related data

4 Pig iron -P The working curve and related data

5 In pig iron S The working curve and related data

6 The measurement accuracy of the actual tested pig iron is: