Piezoresistive pressure transmitter

Introduction: Overview of piezoresistive pressure transmitter: The sensor signal of the piezoresistive pressure transmitter is converted into a standard signal output after signal processing circuit. The product has undergone strict screening and performance evaluation through long-term aging and stability assessment processes. Applied to harsh environments such as dew

Piezoresistive typePressure transmittersummary:

The sensor signal of the piezoresistive pressure transmitter is converted into a standard signal output after signal processing circuit. The product has undergone strict screening and performance evaluation through long-term aging and stability assessment processes. Applied to the environment

In relatively harsh outdoor environments, it is required to be able to observe pressure display on site, and to perform zero shift and range adjustment. Suitable for petroleum, chemical, metallurgical, power, light industry, textile, building materials

Process control and pressure measurement in industries such as hydrogeology, food, medicine, and environmental control. It is called a "programmable resistor". Programmable resistor chip enables transmitter to be used with automatic testing equipment

Installation and calibration to improve production quality and reduce costs.

Performance of piezoresistive pressure transmitter

Various liquids, gases, or vapors compatible with 316L stainless steel for measuring media

Measurement range -0.1kPa~0~0.01kPa~100MPa

Overload 1.5 times full range pressure or 110MPa (take very small value)

Pressure type: gauge pressure, absolute pressure, sealing reference pressure

Power supply 15-30VDC 15-28VDC 15-28VDC

Output signal 4-20mADC 0-10/20 mADC 0/1-5/10VDC

Transmission method: 2-wire system: 3-wire system: 3-wire system:

*Typical degree: ± 0.25% FS Very large: ± 0.5% FS

(including nonlinearity, hysteresis, and repeatability)

Long term stability typical: ± 0.1% FS very large: ± 0.2% FS

Zero temperature coefficient 0.03% FS/℃ (≤ 100kPa) 0.02% FS/℃ (＞ 100kPa)

Full temperature coefficient 0.03% FS/℃ (≤ 100kPa) 0.02% FS/℃ (＞ 100kPa)

Working temperature -30~80 ℃

Storage temperature -40-100 ℃

Load resistance ≤ (U-15)/0.02 Ω

Electrical connections, cable connections, aviation connectors, Hirschman connectors

Shell material: Stainless steel 1Cr18Ni9Ti

Process interface M12 × 1 N20 × 1.5 or G 1/4 external thread

Protection level IP65

Explosion proof mark Exia Ⅱ CT6 (intrinsic safety explosion-proof type)