Piercing type thermistor

NegotiableUpdate on 11/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

■ Temperature measurement range -50~260 ℃ ■ Suitable for the pharmaceutical and food industries, in compliance with GMP standards ■ Can provide single or double thermal resistors ■ Connection cable silicone, PTFE， Metal network cable ■ Anti steam, anti pressure, high mechanical strength ■ Excellent shock resistance, handle can prevent oil and acid ■ Equipped with conical and acute angled stainless steel probe protection tube (25 or 45)

Product Details

Product Application

Disinfection, steaming, and drying processes in the pharmaceutical and food industries

High pressure disinfection kettle

Sterilization equipment

Industrial kitchen equipment

■ Oven

Pharmaceutical and food hygiene industries

Technical data

Electrical connection	The end of the wire is exposed and can be equipped with a cold press connector or a multi pin connector
connecting wire	Silicone, ambient temperature -50~180 ℃
	Polytetrafluoroethylene, ambient temperature -50~260 ℃
	Optional shielded cable
Handle	Silicone handle, maximum ambient temperature of 200 ℃
	Polytetrafluoroethylene handle, maximum ambient temperature of 260 ℃
Protection tube	Stainless steel, 3mm, 4mm
Insertion end	Center sharp angle 25 °
	Tilt angle 45 °
accuracy class	Pt100, Class A: ± (0.15+0.002 \| t \|)
	Grade B: ± (0.30+0.005 \| t \|)
	\| t \| "is the absolute value of the measured temperature of the temperature sensing element
response time	t0.5，10s～120s
Protection level	IP67
wiring method	Two wire system, three wire system, four wire system

Instructions

·The standard materials for the wire and handle are polytetrafluoroethylene wire and silicone handle. If you need to choose other materials, please consult our sales staff and indicate them when selecting;

·The standard protective tube is straight. If you need an L-shaped protective tube, please consult our sales staff and indicate the length from the bending angle to the piercing end (insertion depth EL mm) when selecting;

·The standard for cable connection ends is to directly expose the outgoing line. If you need a cold pressed joint or socket, please consult our sales personnel and indicate it when selecting;

·The protective tube and process connection material come standard with stainless steel 1.4435. For other stainless steel materials, please consult our sales staff and specify when selecting.