Photothermal catalytic reactor

This product is suitable for precision chemical synthesis reaction experiments that require simultaneous measurement of temperature, addition of inert gas, high temperature and high pressure, online pH measurement, and conductivity measurement during photochemical and chemical reactions. Application examples: photocatalytic reactions, high-temperature and high-pressure synthesis, kinetic detection, Fischer Tropsch reactions, hydrogenation reactions, polymerization reactions, homogeneous reactions, etc.

Photothermal catalytic reactorThe function introduction and technical parameters are as follows:

◆Use an insertable K-type needle sensor made of stainless steel (316L) material.

◆design temperature200 ℃, maximum working temperature: ≤ 200 ℃, temperature display accuracy: ±1℃. (Optional mixing and heating device)

◆Design pressure: 2.4 Mpa， Safe use pressure:<2.4 Mpa。

◆Standard configuration: 316L material reaction kettle body, imported quartz lens, needle type K-type sensor, intake valve, exhaust valve, pressure gauge, cooling inlet nozzle, cooling outlet nozzle, one set of special wrench.

◆ Install pressure gauges for compression and shock resistance, as well as intelligent safety relief valves.

The valve fittings are in English 1/4 standard, and the interfaces are all standard configurations.

Photothermal catalytic reactorInstructions for using the kettle:

Open the packaging and take out the kettle body to check if the equipment is intact. After confirming that the equipment is intact, open the top cover of the reaction kettle and use a special wrench to rotate counterclockwise to open it. After opening the coverAdd an appropriate amount(Less than totalvolume70%)ofCover the back of the materialCover up. Use a specialized wrench to tighten diagonally clockwise. The left side of the pressure gauge serves as the intake valve port, and the right side serves as the exhaust valve. Special experimental conditions are also interchangeable. The cooling water nozzle is connected with low inlet and high outlet, and the safety valve below the pressure gauge only has a pressure greater than5MpaOnly activate the pressure relief function at that time.