Peterson Sludge Sampler, Bottom Sediment Sampler, Sludge Sand Extraction Instrument

Petersonmud sampler

1 parameter indicators

1/16PetersonMud collector (large size mud collector)

Weight:7 kg

Sampling area:1/16square meter

Product dimensions:32 * 20 * 15 cm(Long)*wide*High)

Dredging depth:15 cm

Recommended sampling depth:0-30 mIf you need to collect sediment or benthic animals from deeper water bodies, it is recommended to contact customer service to customize additional weights

Volume:7-8 L

Gift: Free gift8-10 mSampling rope, can be used directly upon receipt.

1/32PetersonMud collector (small size mud collector)

Weight:4.5 kg

Sampling area:1/32square meter

Product dimensions:21 * 15 * 11 cm(Long)*wide*High)

Dredging depth:11 cm

Recommended sampling depth:0-10 m

Volume:3-4 L

2 purpose

2.1 Mainly used for mud sample collection in the field of water environment, widely used in scientific research institutions, universities, various water plants, field experimental stations, etc.

3.Operation steps:

3.1Tie the rope to the hookupLift the mud collector with both hands, and the mud collector will unfold;

3.2Unfold the mud collector and place it in the water, allowing it to sink naturally until it reaches the bottom of the water,pullRope, at this point, the loose leaf of the mud collector will close. Lift the mud collector out of the water, lift the steel wire ropes on both sides, pour out the mud sample, and collect it.

Maintenance method:

After use, clean and dry the sampling equipment, and store it in a cool and dry place for future use.

Peterson Sludge Sampler, Bottom Sediment Sampler, Sludge Sand Extraction Instrument

Peterson Sludge Sampler, Bottom Sediment Sampler, Sludge Sand Extraction Instrument

3.Operation steps:

3.1Tie the rope to the hookupLift the mud collector with both hands, and the mud collector will unfold;

3.2Unfold the mud collector and place it in the water, allowing it to sink naturally until it reaches the bottom of the water,pullRope, at this point, the loose leaf of the mud collector will close. Lift the mud collector out of the water, lift the steel wire ropes on both sides, pour out the mud sample, and collect it.

Maintenance method:

After use, clean and dry the sampling equipment, and store it in a cool and dry place for future use.