Patterned conveyor belt

Product Name: Pattern Conveyor Belt Main Features: Pattern conveyor belt is composed of belt body and pattern part

Product Name: Patterned conveyor belt

Main features: A patterned conveyor belt is composed of a belt body and patterned parts. Due to the different materials transported and the inclination angle of the conveyor, the shape, height, and depth of the patterned parts are required to be different. The surface has a "human" shaped pattern higher than the belt body, and each pattern can be divided into three types: high, medium, and low

Technical parameters: Please refer to the detailed introduction below

Product advantages: Suitable for conveying powdered, granular, and small materials with an inclination angle of ≤ 40 degrees. It can also transport packaging bag materials

Main features:

1. The conveyor belt should be kept clean during transportation and storage, avoiding direct sunlight, rain and snow immersion, and preventing contact with substances that affect the quality of rubber such as acids, alkaline oils, organic solvents, etc. It should also be kept at a distance of 1 meter from the heating device

2. The temperature inside the warehouse should be maintained at 15 ℃+40 during storage. C. The relative temperature should be maintained between 50% and 80%

3. The conveyor belt in storage must be placed in rolls and not folded. During the storage period, it should be flipped once every season

4. The running speed of the conveyor belt should not exceed 50 meters per second. When transporting materials with large block size and high wear, and using a fixed plow type unloading device, low speed should be used as much as possible. Exceeding the specified speed will affect the service life of the tape

5. The relationship between the diameter of the transmission drum of the transport machine and the fabric layer of the conveyor belt, the matching of the transmission drum with the changing drum, and the requirements for the groove angle of the idler should be reasonably selected according to the design regulations of the transport machine

6. The following precautions should be taken when using conveyor belts:

To prevent the roller from being covered by material and causing ineffective rotation, prevent material leakage from getting stuck between the drum and the tape, pay attention to lubrication of the moving parts, but do not oil the conveyor belt

B strives to avoid starting with load

The C tape has deviated. Immediate measures should be taken to correct it

If local damage to the tape is found, it should be repaired in a timely manner to avoid expansion

E Avoid the tape from being blocked by the frame, pillars, or block materials to prevent it from being bumped, torn, or torn