Parker piston pump from the United States

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The PV046R1K1T1NMMC piston pump from Parker Corporation is a variable axial piston pump in the PV Plus series.

Product Details

Parker piston pump from the United States

PV046R1K1T1NMMCIt's the United StatesParker (Parker)companyPV Plus seriesA variable axial piston pump in.

According to Parker's naming convention, the specific meaning of this model is as follows:

table

Code snippets	meaning	explanation
PV046	Specifications and displacement	The shell specification is 2, and the maximum displacement is46 ml/rev
R	rotation direction	clockwise rotation(From the perspective of the shaft end)
1K1	Controller type	Standard pressure compensation (constant pressure) variable controller
T1	Shaft seal and interface	Standard configuration (usually referring to nitrile rubber sealed NBR, metric oil port)
N	Flanges and shafts	Metric mounting flange (ISO 3019/2), cylindrical shaft with flat key
M	Oil port position	Standard oil suction/pressure port position
M	Compensator position	Position of standard pressure compensator
C	Through axis drive	No shaft drive(Single pump configuration)

⚙️ Core technical parameters

rated pressure：350 bar
high pressure420 bar (peak pressure)
large displacement：46 cm³/rev
Output traffic: About69 L/min(At 1500 rpm)
rated speed: High accessibility3000 rpm
medium temperatureThe working temperature range is -40 ° C to+115 ° C
materialCast iron pump body
Place of OriginMade in Germany

💡 Application scenarios and characteristics

Main applicationsWidely used forinjection molding machine、rubber machinery、machine tool、Railway maintenance equipmentandconstruction machineryWait.
Product Features：

high power densitySmall in size, but capable of withstanding high pressure and high power density.
low noiseAdopting a 9-plunger design and pre compression volume technology, the flow pulsation is small and the operation is quiet.
fast responseVariable control has a short response time (up swing<70ms, down swing<40ms).
filtration accuracy: Must be used3μm～5μmHigh precision filters.
Oil suction pressureEnsure that the pressure at the oil suction port is not less than 0.8 bar to prevent cavitation.