Paper products constant temperature and humidity testing box

Paper products constant temperature and humidity testing boxAipei Technology produces both wet and hot testing equipment, as well as high and low temperature testing equipment, which are not only suitable for paper products and AC pile products, but also for various industrial products such as electronicsLEDDisplay screens, lighting fixtures, batteries, biological, medical, chemical, pharmaceutical, hardware products, communication products, ceramic sanitary ware and other finished, semi-finished or work in progress products.

The constant temperature and humidity testing chamber is suitable for reliability testing of industrial products under high temperature, low temperature, and humidity conditions. The high and low temperature test chamber is suitable for conducting reliability tests on industrial products at high and low temperatures. The functions between them can be tested in a constant, alternating, or cyclic manner.

Paper products constant temperature and humidity testing boxControl method:

1.Anti integral saturation PID;

2. BTC balance temperature control method+DCC intelligent cooling capacity control+DEC intelligent electrical control (temperature testing equipment))；

Set the operating mode:

JapanOYO9256PChinese and English menus (freely selectable), touch screen input, programmatic operation;

Program capacity: There are 120 programs, and one program has120paragraph,The control range for a period of time is 999 hours and 59 minutes, which can be cycled 9999 times.

divideResolution: Temperature: 0.1 ℃; Time: 1 minute;

Input: PT100 platinum thermistor.

Curve recording function: Equipped with RAM with battery protection, it can save the set values, sampling values, and sampling time of the device; The recording time is 180 days(When the sampling period is 60 seconds).

Temperature measurement: Temperature:PT100Platinum thermistor; Dry bulb thermometer method.

Communication function: It can directly export data curves via USB or connect to a computer through the R232 communication interface.

Additional functions:

1. Self diagnostic function; Fault alarm and cause, processing prompt function.

2. Upper and lower temperature protection function; Power off protection function.

3. The calendar timing function automatically starts and stops running）.

Paper products constant temperature and humidity testing boxPerformance parameters:

Temperature range:0 ℃，-20 ℃，-40 ℃，-60 ℃，-70 ℃~150 ℃;

Corresponding to a volume of 80 liters: width 40x height 50x depth 40cm; external dimensions are based on actual dimensions.

Corresponding to a capacity of 150 liters: width 50cm x height 60cm x depth 50cm; external dimensions are based on actual dimensions.

Corresponding to a volume of 225 liters: width 50x height 75x depth 60cm; external dimensions are based on actual dimensions.

Corresponding to a volume of 408 liters: width 60x height 85x depth 80cm; external dimensions are based on actual dimensions.

Corresponding to a capacity of 800 liters: width 100x height 100x depth 80cm; external dimensions are based on actual dimensions.

Corresponding to a capacity of 1000 liters: width 100x height 100x depth 100cm; external dimensions are based on actual dimensions

Temperature range: 20% -98% R.H

Heating rate: average 3 ° C/min

降温速率：Average 1 ° C/min

Internal material: SUS # 304 high-quality stainless steel plate

Shell material:SUS # 304 brushed stainless steel plate or rust resistant cold-rolled steel plate (spray painted)

Insulation material: polyurethane foam

manufacture cold Machine: Fully enclosed (French Taikang) compressor

Agent: R23/ R404A

Condensation method: Air-cooled or water-cooled

Paper products constant temperature and humidity testing boxPurpose: Suitable for adaptability testing of instruments, electrical, electronic and other products, components and materials during storage, transportation and use in high and low temperature, humid and hot environments; It is a reliability testing equipment for various electrical, electronic, electrical, plastic and other raw materials and components to conduct cold resistance, heat resistance, moisture resistance, dry resistance tests and quality control engineering; Especially suitable for LED, inductor PCB、 High temperature resistance, low temperature resistance, and wet heat cycle resistance tests for products such as optoelectronics, optical fibers, crystal cells, computers, and mobile phones.