Panasonic high-pressure sterilization pot

1Scope of application

Panasonic high-pressure sterilization potMVS-83Used for sterilization needs in hospitals, research institutions, pharmaceutical companies, and other units.

2、 Main indicators

1. Design capacity of 83L;

Effective volume 75L;

Appearance dimensions: 600 (width) x 620 (depth) x 1005 (height) mm;

2. Temperature range: sterilization temperature 115~135 ℃;

Moisturizing temperature 45~60 ℃;

Dissolving temperature 60-115 ℃;

3. Sensor: Temperature sensor PT100; Bottom sensor PT100; Pressure sensor 0-5V;

4. Standard cooling fan: 1 axial flow fan; 1 shielded fan;

5. Power requirements: single-phase AC220V ± 10%, 50Hz; current: 17~21A;

6. Pressure vessel related standards: Outer box material: Spray coated steel plate;

Design pressure 0.241Mpa;

Pressure gauge range -0.1~0.4Mpa;

Container material: S30408, corrosion-resistant stainless steel;

National standards: GB150, YY1007;

Pressure vessel category: Class I;

Manufacturing license level: D1;

Weight (whole machine) 90KG;

Drainage pipe diameter: 15mm;

Heating power: 4KW;

7. Accessories: 1 drainage hose, 1 front cooling bucket, 1 rear cooling bucket, 1 rear cooling bucket bracket;

8. Standard equipment: Sterilization basket - stacking capacity of 3; Object temperature sensor PT100;

9. Safety device: safety valve - exhaust beyond 0.235Mpa; Jumping thermostat - limits the temperature at the bottom of the barrel;

10. Operation mode: Normal sterilization - can sterilize liquids such as water, culture medium, reagents, liquid food, etc; Sterilization and insulation - items can be insulated after sterilization; Sterilization of instruments - flasks, beakers, culture dishes, and other instruments that can withstand rapid decompression are used for sterilization; Dissolve and keep warm - Dissolve the culture medium and keep warm;

11. Parameter setting: Parameter setting - maximum sterilization temperature of 135 ℃;

Maximum operating pressure -0.241Mpa;

Sterilize within a temperature range of 115 ℃ to 135 ℃;

Insulation at 45 ℃~60 ℃;

Dissolve at 60 ℃~115 ℃;

Sterilization within a timed range of 0-5 hours and 59 minutes;

Dissolve for 0-5 hours and 59 minutes;

Insulate for 0-72 hours and 59 minutes, with a resolution of 1 minute;

12. Other functions:

ØPanasonic high-pressure sterilization potMVS-83The container is equipped with a built-in steam source and a 4kW heating wire. Ensure that sufficient water is poured in each operation;

Ø Rapid cooling of steam emissions - the structure avoids boiling of cooling steam with water;

Ø Sound prompt - There is a corresponding "beep" sound prompt at the beginning and joint of each stage of operation;

Ø Altitude - The manual states that it can be used at an altitude of 0-3000m, but in reality it can be used at 0-4000m;

System time setting - change the internal time of the control system;

Ø Sterilization counting function - with the sterilization word mode, automatically accumulates the count after the sterilization stage is completed;

Ø Rapid cooling function -1 axial flow fan and 1 cover pole fan are turned on during the cooling stage to quickly cool the temperature inside the container;

Ø Comes with a water bucket - easy to move and avoids steam discharge;

Easy to add water - open the top cover and put in sterilization water;

Ø Discharge outlet - a 15mm drainage outlet, convenient for discharging sterilization water;

Controllable steam discharge temperature - steam discharge temperature adjustment range: boiling point~(boiling point+45 ℃);

13. Alarm function (common alarms and their causes);

Abnormal temperature sensor -3 PT100 sensors faulty;

Low water level, please replenish water - dry burning, lack of water, air or water leakage, blocked exhaust port, abnormal bottom temperature sensor triggering alarm;

Abnormal heating - above 139 ℃;

Check if the head position of temperature sensor 2 is correct - above 140 ℃;

Ø The door lock cannot be locked - the temperature inside the container is too high, and the upper cover cannot be locked tightly;

Ø The door lock cannot be unlocked - the handle travel is limited and the lock cannot be tightened;

Abnormal high pressure - pressure exceeding 0.33Mpa, sterilization stage pressure value higher than the corresponding value in the pressure temperature comparison table by 0.04Mpa;

Abnormal low pressure - The pressure value during the sterilization stage is 0.04Mpa lower than the corresponding value in the pressure temperature comparison table;

Unheated - the temperature does not rise within 2 minutes;

Ø Main control board failure - Main control board failure;

14. Human computer interaction

Ø Quick opening mechanism - press the upper cover with one hand and swipe the handle left and right with the other hand to open and close the upper cover;

Ø Hidden front cooling bucket - aesthetically pleasing design;

Ø Cooling bucket water level observation window - The observation window is located on the front side of the machine, making it convenient to observe the water level;

Ø 5-inch true color touch screen - displays temperature, pressure, and time on the same screen at a glance;

Touch operation - Consistent with mobile phone operation, convenient to set up;

15. Intelligent management

Ø Simple parameter setting - the interface is like a mobile app interface for inputting parameters, simple and direct;

Ø Intelligent chip - microcomputer intelligent process control;

Ø Power off parameter memory - the parameters can be saved even when the power is turned off without loss;

Ø Program Stage Prompt - There is a sound prompt at the beginning of each stage, and the touch screen has corresponding progress curve color differentiation;

Ø Sleep function - timeout without locking the upper cover;

Ø 16 preset programs - each mode contains 4 programs, totaling 16 programs;

16. Hierarchical management

Ø Password permissions - prevent maintenance or technical personnel from mistakenly changing parameter settings

Ø Calibration accuracy - Calibration accuracy of 0.1 ℃

17. Intelligent management

Ø One click quick execution - deal with a large number of repetitive operations to avoid errors caused by repetitive operations;

Appointment scheduled start - accurate to year, month, day, and hour, convenient for adjusting working hours;

18. Pharmaceutical factories and laboratories

Standard G1/2 connector - reserve 2 standard G1/2 threaded interfaces, which can connect temperature and pressure monitoring equipment to meet GMP and GLP requirements;

19. Internet

RS485- Reserved 485 interface for remote control according to requirements;

20. Closed loop control

Sleep function - ensures the integrity of the action from placing objects to taking them out: after sterilization is completed, the touch screen displays the real-time temperature inside the container, the countdown is zero, and if the lid is not opened for a short period of time, it automatically locks the lid to prevent other personnel from operating it incorrectly; Touch the real-time temperature area on the screen, unlock the upper cover, and extract the sterilized material. The real-time temperature and countdown on the touch screen will change to the last set parameters.

3、 Product Qualification

Medical Device Manufacturing Enterprise License;

Medical Device Registration Certificate of the People's Republic of China;

ISO9001 Quality Management System Certification;

ISO14001 Environmental Management System Certification;

ISO13485 Medical Device Quality Management System Certification;

OHSAS18001 Occupational Health System Certification;