Panasonic high-pressure sterilization pot

Panasonic high-pressure sterilization potMVS-63

1Scope of application

Used for sterilization needs in hospitals, research institutions, pharmaceutical companies, and other units.

2、 Main indicators

1. Size: The cavity size is φ 370 × 795

effective volume55L

Overall Dimensions600 (width) x 620 (depth) x 820 (height) mm

2. Temperature range: sterilization temperature115~135℃

Moisturizing temperature45~60℃

Dissolving temperature60~115℃

3. Sensor: Temperature sensorPT100； Bottom sensor PT100; Pressure sensor 0~5V

4. Standard cooling fan: Axial flow fan1; 1 shielded fan

5. Power requirement: single-phaseAC220V ± 10%, 50Hz; Current: 17~21A

6. Pressure vessel related standards: Outer box material: Spray coated steel plate

design pressure0.241Mpa

pressure gauge range-0.1~0.4Mpa

Container material:S30408, Corrosion resistant stainless steel

national standard:GB150、YY1007

Pressure vessel category:Class I

Manufacturing License Level:D1

Weight (whole machine)90KG

Drainage pipe diameter:φ15mm

Heating power:4KW

7. Accessory: Drainage hose1 piece, 1 front cooling bucket, 1 rear cooling bucket, 1 rear cooling bucket bracket

8. Standard product: Sterilization basket-Stacked to accommodate 3; Object temperature sensor PT100

9. Safety device: safety valve-Exceeding 0.235Mpa for exhaust; Jumping thermostat - limiting the temperature at the bottom of the barrel

10. Operation mode: Normal sterilization-Can sterilize liquids such as water, culture media, reagents, and liquid food; Sterilization and insulation - items can be insulated after sterilization; Sterilization of instruments - flasks, beakers, culture dishes, and other instruments that can withstand rapid decompression are used for sterilization; Dissolve and keep warm - Dissolve the culture medium and keep warm

11. Parameter settings: Parameter settings-Maximum sterilization temperature 135℃

Maximum operating pressure-0.241Mpa

Sterilization using temperature range115℃~135℃

insulation45℃~60℃

dissolve60℃~115℃

Timed range sterilization0-5 hours and 59 minutes

dissolve0-5 hours and 59 minutes

insulation0~72 hours, 59 minutes, resolution 1 minute

12. Other functions:

ØContainer with built-in steam source-Built in 4kW heating wire, ensure sufficient water is poured in each operation

ØRapid cooling of steam emissions-Structure to avoid boiling of cooling steam with water

Øaudio prompt-There is a corresponding 'beep' sound prompt at the beginning and end of each stage of operation

Øaltitude-The manual states that it can be used at an altitude of 0-3000m, but in reality it can be used at an altitude of 0-4000m

ØSystem time setting-Change the internal time of the control system

ØSterilization counting function-After the sterilization stage is completed in the sterilization mode with the word 'sterilization', the count will be automatically accumulated

ØQuick cooling function-1 axial flow fan and 1 cover pole fan are turned on during the cooling stage to quickly cool the temperature inside the container

ØComes with a water bucket-Easy to move and avoid steam discharge

ØEasy to add water-Open the top cover and put in sterilization water

Ødischarge outlet-A drainage outlet with a diameter of 15mm facilitates the discharge of sterilization water

ØControllable steam emission temperature-Steam emission temperature regulation range: boiling point~(boiling point+45 ℃)

13. Alarm function (common alarms and their causes)

ØAbnormal temperature sensor-3 PT100 sensors malfunction

ØThe water level is too low, please replenish water-Dry burning, lack of water, air or water leakage, blocked exhaust port, abnormal bottom temperature sensor triggering alarm

ØAbnormal heating-Above 139 ℃

ØCheck the temperature sensorIs the head position correct - above 140 ℃

ØThe door lock cannot be locked-The temperature inside the container is too high, and the top cover cannot be locked tightly

ØThe door lock cannot be unlocked-The handle travel is limited and the lock cannot be tightened

ØAbnormal high pressure -The pressure exceeds 0.33Mpa, and the pressure value during the sterilization stage is higher than the corresponding value in the pressure temperature comparison table, which is 0.04Mpa

ØAbnormal low pressure -The pressure value during the sterilization stage is 0.04Mpa lower than the corresponding value in the pressure temperature comparison table

Øunheated-The temperature has not risen for 2 minutes

ØMain control board malfunction -Main control board malfunction

14. human-computer interaction

ØQuick opening mechanism-Press the top cover with one hand and swipe the handle left and right with the other hand to open and close the top cover

ØHidden front cooling bucket-Beautiful design

ØCooling bucket water level observation window-The observation window is located on the front side of the machine for easy observation of water level

Ø5-inch true color touch screen - displays temperature, pressure, and time on the same screen at a glance

Øtouch operation-Consistent with mobile phone operation, convenient to set up

15. intelligent management

ØSimple parameter setting-The interface is like a mobile app interface for inputting parameters, simple and direct

Øsmart chip-Microcomputer based intelligent process control

ØPower outage parameter memory-After saving the parameters, turning off the power can also save them without losing them

ØProgram Stage Tips-At the beginning of each stage, there is a sound prompt, and the touch screen has corresponding progress curve color differentiation

ØSleep function-Failed to lock the upper cover after timeout

Ø16 preset programs - each mode contains 4 programs, totaling 16 programs

16. hierarchical management

Øpassword permission-Prevent maintenance personnel or technicians from mistakenly changing parameter settings

Øcalibration accuracy-Calibration accuracy 0.1 ℃

17. intelligent management

ØOne click quick execution-Dealing with a large number of repetitive operations to avoid errors caused by repetitive operations

ØAppointment scheduled start-Accurate to year, month, day, and hour, convenient for adjusting working hours

18. Pharmaceutical factories and laboratories

standardG1/2 connector - Reserve 2 standard G1/2 threaded interfaces, which can be connected to temperature and pressure monitoring equipment to meet GMP and GLP requirements

19. Internet

RS485- Reserved 485 interface for remote control according to requirements

20. closed-loop control

Sleep function-Ensure the integrity of the action from placing objects to removing them: After sterilization is completed, the touch screen displays the real-time temperature inside the container, the countdown is zero, and if the lid is not opened for a short period of time, it automatically locks the lid to prevent other personnel from operating it incorrectly; Touch the real-time temperature area on the screen, unlock the upper cover, and extract the sterilized material. The real-time temperature and countdown on the touch screen will change to the last set parameters.

Panasonic high-pressure sterilization potMVS-63

IIIproductqualification

Medical Device Manufacturing Enterprise License

Medical Device Registration Certificate of the People's Republic of China

ISO9001 Quality Management System Certification

ISO14001 Environmental Management System Certification

ISO13485 Medical Device Quality Management System Certification

OHSAS18001 Occupational Health System Certification