Packing string rod

Application scope of packing rod: Ideal products for cooling tower circulating water supply in petroleum, chemical, metallurgical, power plant, textile and other industrial and mining enterprises

Packing: Packing is the most important part of a cooling tower, and its efficiency depends on the degree of sufficient contact between cooling water and air in the packing. Our company's fillers have a temperature resistance of 50 ℃~68 ℃, aging resistance, excellent performance, and long service life. Its advantages are as follows:

1. Good heat exchange performance and high cooling efficiency

The filler is thin film type, and the protruding fine ripples make the water contact surface larger. The filler is placed in five layers, and there is a redistribution process of hot water between each layer.

2. Good hydrophilicity and low ventilation resistance

Fillers with rough and smooth surfaces have good hydrophilicity, with a water absorption rate of less than 0.015%, allowing more water flow to form a thin film without splashing, allowing for more thorough contact between water and air while causing greater surface disturbance during their flow. After packing assembly, the air inlet surface is a honeycomb shaped guide, which has a good uniform air distribution effect and improves and stabilizes the heat exchange intensity of water and gas.

The inlet end is tilted at a 30 ° angle, effectively reducing water loss. A water collector designed according to the impact separation method is installed at the end of the packing material to effectively control the loss of floating water within 5/100000.

3. Easy to install, easy to clean, and convenient to transport

The heat dissipation filler adopts a non adhesive suspension type, which is easy to install and clean. It also successfully solves the problem of adhesive filler deformation caused by dust accumulation and self weight, and the problem of more serious and difficult to clean after deformation. The filler has good flame retardant performance, and after testing, the flame retardant oxygen index index is greater than 28.

4. The design of the large "honeycomb" structure has a guiding effect and a good uniform air distribution effect, which improves and stabilizes the heat exchange intensity of water and gas. The inlet end is inclined at a 30 degree angle, effectively reducing water loss. The precise positioning and equidistant combination facilitate the formation of a large area of flowing water film perpendicular to the surface of the water flow, promoting the contact surface of the large airflow. The built-in louver air inlet is formed on the packing, making the distribution of air water ratio in the packing uniform and reasonable. The unique and efficient water purifier is integrated with the packing mold, effectively removing water droplets from the humid and hot air and returning them to the tower, greatly reducing the loss of floating water. The floating water loss rate is less than 0.001%.