PP dust-free laser automatic cutting machine

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

To solve the series of problems caused by cutting machines, Zhengye Technology has independently developed multiple types of heating devices for PP cutting machines. Based on the infrared heating PP automatic cutting machine technology, we have launched a PP dust-free laser automatic cutting machine, which uses laser to soften the cutting part, avoid whitening and impurities from the incision, and improve the cutting quality.

Product Details

PP dust-free laser automatic cutting machineMainly used for cutting semi cured film rolls into strips and blocks. Seemingly simple, cutting everything can complete it. In fact, it is not an easy task.

Method 1: Directly applyCutting of PP (semi cured sheet) material

Causing the incision to turn white, the quality of the incision edge to deteriorate, dust pollution, polluting the working environment, and affecting the health of operators.

Method 2: Use laser cutting or add heating devices on the cutting machine

Laser direct cutting at high temperatures leads to blackening and carbonization of the resin;

The heating area and position of the hot blowing device cannot be precisely controlled, resulting in uncontrollable cutting quality.

To solve the series of problems caused by cutting machines, Zhengye Technology has independently developed multiple types of heating devicesPP cutting machine, based on the infrared heating PP automatic cutting machine technology, has specially launched a laser heating semi cured sheet dust-free automatic cutting machineLaser softens the cutting part to avoid whitening of the incision and the generation of impurities, thereby improving the cutting quality.

PP dust-free laser automatic cutting machinecharacteristic

lLaser heating, neat and low dust incision

Using laser heating technology with high energy density, the PP sheet is heated first and then cut. The cut is neat, with automatic edge sealing, no wire drawing, and no obvious dust.

lVacuum cleaner with servo control, environmentally friendly and precise

Add a vacuum cleaner, reduce dust and promote environmental protection and health through detailed calculations and fluid analysis;

Adopting a transmission mechanism and synchronous servo control system, the cutting accuracy is high.

lMore efficient production efficiency

Dynamic heating for horizontal and vertical cutting, doubling cutting efficiency;

After cutting, PP sheets can be used directly, and automatic stacking saves time and effort;

One step parameter packaging, easy and efficient operation.

lMultiple functional configurations to meet different needs

The equipment has different strip and cross cutting configuration and material selection, including winding, loading and unloading, automatic tension system, scanning codeTen optional functions, including MES docking, are available to meet different production needs.

technical parameters

project		Technical parameter selection
cutting length		160～1200 mm
cutting width		300～1260 mm
cutting thickness		0.04～0.3mm
Cutting accuracy		Length direction: ± 1 mm; Width direction: ± 1 mm
Cutting effect		There is no obvious whitening, folding, wrinkling, burning or carbonization at the edge of the incision, and the incision is neat with no obvious dust; Cut dust reduction (tested with 7628 material): greater than 95%
走料速度		≤30 m/min
Slice frequency		PP7628 ≤ 16 times/minute; PP1080 ≤ 18 times/minute (calculated based on the cutting length of 500mm)
Dividing knife		Cutting method: □ Round knife pressure cutting type □ Round knife cutting type Knife adjustment method: □ Manual knife adjustment£automatic tool adjustment Number of round knives: □ Standard 3 sets of knives □ 4 sets of knives □ 5 sets of knives
cross-cutting knife		Cutting method: □ Pneumatic cutting □ Motor cam cutting Material: □ Tungsten steel □ White steel
select match merit can	Half roll and half cut function	□ None □ Includes semi winding and semi cutting device
	Border material collection function	□ None □ Contains border material collection agencies
	Automatic tension system	□ None □ Yes
	sheet metal enclosure	□ Spray painting □ Stainless steel
	Dust collection automatic start stop function	□ None □ Yes (workshop requires sufficient installation height)
	Anti-static rod	□ 1 piece □ 2 pieces □ 3 pieces □ 4 pieces □ 5 pieces □ 6 pieces
	Feeding Method	□ Manual □ Boom □ Electric stacker □ Cylinder trolley
	Receiving method	□ Material receiving platform □ Cutting machine (feeding speed □ 12 pieces/minute feeding speed □ 18 pieces)\\Minutes)
	Scan code function	□ None □ Scan code gun
	MES docking requirements	□ None □ Yes (MES specific requirements to be confirmed and quoted separately)

As a provider of industrial testing intelligent equipment, Zhengye Technology has been deeply involved in the PCB industry for more than 20 years. In the future, Zhengye Technology will not forget its original intention and continue to devote itself to the PCB industry, providing strong support for improving the manufacturing efficiency of PCB enterprises, offering higher quality products and services to major manufacturers, and contributing to the creation of an independent and controllable supply chain and coordination mechanism, jointly promoting the healthy, sustainable, and stable development of the PCB industry!